XZR8® 鑫众润
暂无图片

日本 Cosel 科索 PBA150F-15 单路输出开关电源 15V 10A 150W AC-DC 模块电源


查看价格
登录以查看您的客户价格
输出电压15 Vdc
输出电流10 A
额定功率150 W
输入电压范围AC 85 - 264 V (single phase) / DC 120 - 370 V
输入频率47 - 63 Hz
功率因数校正Active PFC (Compliant with IEC 61000-3-2 Class A)
典型效率86% (100VAC Input), 88% (200VAC Input)
电压调整率±0.4% (Maximum)
负载调整率±0.8% (maximum)
纹波噪声150 mVp-p (typical, 20MHz bandwidth)
启动时间< 500 ms (Typical)
保持时间> 20 ms (Typical, Full Load)
过流保护105% - 140% rated current, snort mode self-recovery
过压保护115% - 135% rated voltage, lock mode (requires restart of input)
过温保护 (OTP)Internal thermal shutdown, self-recovery
工作温度范围-10°C to +70°C (derating curve required)
存储温度范围-30°C to +85°C
冷却方式Natural Convection Cooling / Forced Air Cooling (refer to derating curve)
绝缘电压Input-Output: 3kVAC, Input-FG: 2kVAC, Output-FG: 500VAC
绝缘电阻> 100 MΩ (500VDC)
漏电流(250VAC/50Hz)< 0.75 mA (240VAC/60Hz)
安规认证UL 62368-1, CSA C22.2 No. 62368-1, EN/IEC 62368-1, CE Mark (LVD, EMC, RoHS)
EMI传导/辐射EN 55032 / CISPR 32 Class B, FCC Part 15 Class B
抗扰度 (EMS)EN 61000-4-2/3/4/5/6/8/11
安装方式Base Plate Mounting (M3 Screws), Optional DIN Rail Mounting Kit (FD-PBA150)
测试Standard with Cap: 61 x 82 x 165 mm; Open Type: 61 x 36.5 x 165 mm
重量Approximately 550 g (With Lid), Approximately 350 g (Open Style)
平均故障间隔时间> 700,000 hours (based on EIAJ RCR-9102B / Telcordia SR-332)
系列对应机型PBA150F Series (including 3.3V, 5V, 12V, 15V, 24V, 36V, 48V output)
制造号
PBA150F-15PBA150F-15-NPBA150F-15-CPBA150F-15-JVNPBA150F-15-MPBA150F-15-RPBA150F-15-RVNPBA150F-15-CRNPBA150F-15-EN
互换号
PBA150F-15-NPBA150F-15-CPBA150F-15-JVNPBA150F-15-MPBA150F-15-RPBA150F-15-RVNPBA150F-15-CRNPBA150F-15-EN
适配车型
Industrial Automation Control CabinetTest and Measurement EquipmentCommunication Base Station EquipmentEmbedded System Power SupplySemiconductor Manufacturing EquipmentMedical Electronic Equipment (Non-Life-Sustaining)

电气与电子系统 - 工业百科

原装进口日本科索 Cosel PBA150F-15 系列开关电源,额定输出 15V 10A 150W,支持 85-264VAC 宽电压输入,内置有源PFC,效率高达 86%。提供带盖型(-C)、端子型(-J)、开放式(-M)等多种安装选项,符合 IEC/EN/UL 62368-1 安全标准,广泛应用于工业自动化、测试测量、通信设备及嵌入式系统。提供完整数据手册、3D模型及选型支持。