暂无图片
| 系列 | SUCS1R5 |
| 额定功率 | 1.5W |
| 功率输出 | 1.32W (3.3V/0.4A) |
| 电压范围 | 9 - 18 Vdc (nominal 12V, 2:1 wide voltage input) |
| 电压输出 | 3.3 Vdc |
| 输出电流 1 | 0.4 A (400mA) |
| 输出范围 | Single Output |
| 隔离压力输入 Fg | 1500 Vdc (input-output, minutes), corrected from the incorrect transmission of 500Vdc on the web page |
| 拧紧方法 | Stabilized Output |
| 负载调整率 | ±1.0% (typical) |
| 波纹度噪声 | 100mVp-p (typical, 20MHz bandwidth) |
| 典型效率 | 78% (typical, Vin=12V, full load) |
| 频率范围 | Approximately 400 kHz (typical) |
| 封装类型 | DIP Direct Insert (C suffix, metal housing) / SMD Surface Mount (B/BP suffix) |
| 间距 | 2.54mm (0.1 inch) |
| 材质 | Metal housing (six-sided shielding) |
| 安装方式 | PCB board mounted |
| 工作温度范围 | -40°C to +85°C (ambient temperature, derating according to curve required) |
| 存储温度范围 | -55°C to +125°C |
| 湿度范围 | 5% - 95% RH (Non-condensing) |
| 冷却液类型 | Natural cooling/forced air cooling |
| 认证 | UL60950-1, C-UL (CSA60950-1), EN62368-1, RoHS Directive |
| 平均故障间隔时间 | > 1,000,000 hours (MIL-HDBK-217F, 25°C) |
| 特殊版本 | C-C suffix indicates Conformal Coating protection |
制造号
SUCS1R5123R3SUCS1R5123R3BSUCS1R5123R3CSUCS1R5123R3BPSUCS1R5123R3C-CMGS1R5123R3
互换号
MGS1R5123R3
适配车型
Industrial Control SystemCommunication Base Station EquipmentInstruments and MetersEmbedded Power DesignDistributed Power Architecture
电气与电子系统 - 工业百科
科索原厂 SUCS1R5123R3 系列隔离稳压 DC-DC 转换器，额定功率 1.5W，输入电压 9-18V (标称 12V)，输出 3.3V/0.4A，隔离耐压 1500Vdc。提供 DIP 直插 (C后缀) 与 SMD 贴片 (B后缀) 封装，金属外壳屏蔽，符合 UL/EN62368 认证，广泛应用于工业控制、通信设备及仪器仪表电源模块设计。