Tachograph programmer (Tacho) 1.allows you to define the W figure determination>New Arrival Tacho Programmer Tachograph Programmer Top 7 Reasons To Get Tachograph Programmer1.Supported languages:English, German, Spanish, French, Dutch, Portuguese, Turkish, Romanian,Syriac, Russian2.No power connection nor battery charging required, the>3.Compact size, the smallest tachograph tester>4.User friendly, clear 4 lines menus, no training required.5.Automatic tachograph model detection>6.Double accuracy of the W factor measure>7.The>Tachograph Programmer Description: 1.Flash program memory, easy software upgrade using a serial port or USB serial adapter>2.Basically, a tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics>3.The new digital tachographs record those data> Supported Tachographs: Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.Digitals: DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4. A Workshop Card is required to calibrate the digital tachographs Tachograph Programmer Functions: W figure determination>K figure measure>Parameter programming.Activation and deactivation of IMS (Independent Motion Signal).Activation and deactivation of VDO counter.Odometer reset and adjustment (mileage correction).Speed simulation and customizable automatic test diagram.DTCS reading (Digital) and erasing.Sensor pairing (KITAS activation).Clock test.Workshop card’s PIN recording and input through