Image non disponible
Module de source d'alimentation à commutation AC-DC PBA75F-9 avec sortie unique 9V 8.4A 75.6W de Cosel
| Sortie de tension | 9V |
| Courant de Sortie 1 | 8.4A |
| Puissance Nominale | 75.6W |
| Gamme de tension | 120-370VDC |
| Gamme de fréquence | 47-63Hz |
| Correction du facteur de puissance | Active PFC, compliant with IEC61000-3-2 Class A |
| Efficacité Typique | Approximately 83% (115/230VAC Full Load) |
| Bruit d'ondulation | < 150 mVp-p (Bandwidth 20MHz) |
| Réglage de la tension | ±0.4% within |
| Taux d'ajustement de charge | ±0.8% within |
| Heure de démarrage | < 500ms (typical) |
| Temps d'attente d'allumage | > 20ms (typical) |
| Protection contre les courts-circuits | Yes, Auto Recovery (Rated Current 105%-140%) |
| protection contre la surpression | Yes, Auto Recovery |
| Circuit de protection | Yes, Burp Mode/Automatic Recovery |
| Température de Fonctionnement | -10°C to +70°C (check derating curve for details) |
| Gamme de Température de Stockage | -20°C to +85°C |
| Type de fluide de refroidissement | Natural Convection Cooling / Forced Air Cooling (depending on installation and load) |
| Tension | Primary-Secondary: 3kVAC, Primary-Ground: 2kVAC, Secondary-Ground: 500VAC (1 minute) |
| Valeur initiale de la résistance d'isolement | > 100MΩ (500VDC) |
| Courant de fuite maximal | < 0.75mA (240VAC/60Hz) |
| Certification | UL60950-1, EN60950-1, CE Marking (LVD), CB Scheme |
| Norme EMC | EN55032 Class B, EN61000-3-2, EN61000-3-3, EN55024 |
| Temps moyen entre les pannes | > 500,000 hours (MIL-HDBK-217F, 25°C) |
| Ouvert N C | 89 x 58.4 x 38 mm (3.5 x 2.3 x 1.5 in) |
| Poids | Approx. 150g (open) |
| Installation | Open frame installation (-N), encapsulated with terminal block (-JN/-RN), base mounting (-VN/-GN), encapsulated with connector (-CN) |
| Classification de série | Synchronous rectification technology, ultra-small and lightweight, built-in harmonic filter, support for parallel redundant operation (for high-power models) |
N° Fabricant
PBA75F-9PBA75F-9-NPBA75F-9-CPBA75F-9-JNPBA75F-9-RNPBA75F-9-VNPBA75F-9-GNPBA75F-9-ENPBA75F-9-JRPBA75F-9-TNPBA75F-9-VPBA75F-9-GPBA75F-9-JPBA75F-9-RN1PBA75F-9-JN1PBA75F-9-N1PBA75F-9-E
N° OEM
PBA75F-9
Véhicules Compatibles
Industrial Control SystemCommunication Equipment (Modem/Router)Medical SystemTemperature Control SystemCommercial Information Technology Equipment (ITE)Embedded Power ApplicationsBasic Board-Level Power Supply
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
Cosel PBA75F-9 series single output AC-DC switching power supply, rated output 9V 8.4A 75.6W, supports 85-264VAC universal full-range input, built-in active PFC power factor correction meets IEC61000-3-2 harmonic standard. Using synchronous rectification technology to improve conversion efficiency, compact and lightweight, offering open frame, encapsulation, bottom board installation and other suffix options after encapsulation (-N/-C/-JN/-RN, etc.), with overcurrent, overvoltage, short-circuit, overtemperature full protection, widely used in industrial control, communication networks, medical equipment, embedded systems and other fields.