Image non disponible
Module de régulateur de tension DC-DC isolé Cosel SUCS1R5123R3 1.5W 12V entrée 3.3V sortie DIP/SMD emballage
| Série | SUCS1R5 |
| Puissance Nominale | 1.5W |
| Puissance de sortie | 1.32W (3.3V/0.4A) |
| Gamme de tension | 9 - 18 Vdc (nominal 12V, 2:1 wide voltage input) |
| Sortie de tension | 3.3 Vdc |
| Courant de Sortie 1 | 0.4 A (400mA) |
| Gamme de sortie | Single Output |
| Entrée de pression d'isolement Fg | 1500 Vdc (input-output, minutes), corrected from the incorrect transmission of 500Vdc on the web page |
| Méthode de Tension | Stabilized Output |
| Taux d'ajustement de charge | ±1.0% (typical) |
| Bruit d'ondulation | 100mVp-p (typical, 20MHz bandwidth) |
| Efficacité Typique | 78% (typical, Vin=12V, full load) |
| Gamme de fréquence | Approximately 400 kHz (typical) |
| Type d'Encapsulation | DIP Direct Insert (C suffix, metal housing) / SMD Surface Mount (B/BP suffix) |
| Espacement | 2.54mm (0.1 inch) |
| Matériau | Metal housing (six-sided shielding) |
| Installation | PCB board mounted |
| Température de Fonctionnement | -40°C to +85°C (ambient temperature, derating according to curve required) |
| Gamme de Température de Stockage | -55°C to +125°C |
| Gamme d'humidité | 5% - 95% RH (Non-condensing) |
| Type de fluide de refroidissement | Natural cooling/forced air cooling |
| Certification | UL60950-1, C-UL (CSA60950-1), EN62368-1, RoHS Directive |
| Temps moyen entre les pannes | > 1,000,000 hours (MIL-HDBK-217F, 25°C) |
| Version Spéciale | C-C suffix indicates Conformal Coating protection |
N° Fabricant
SUCS1R5123R3SUCS1R5123R3BSUCS1R5123R3CSUCS1R5123R3BPSUCS1R5123R3C-CMGS1R5123R3
N° Interchangeable
MGS1R5123R3
Véhicules Compatibles
Industrial Control SystemCommunication Base Station EquipmentInstruments and MetersEmbedded Power DesignDistributed Power Architecture
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
Cosel original SUCS1R5123R3 series isolation voltage regulator DC-DC converter, rated power 1.5W, input voltage 9-18V (nominal 12V), output 3.3V/0.4A, isolation voltage 1500Vdc. Available in DIP through-hole (C suffix) and SMD surface mount (B suffix) packages, metal housing shielding, compliant with UL/EN62368 certification, widely used in industrial control, communication equipment and instrument power module design.