Connecteur mâle non étanche de la série KET ST740673-3 090 II en laiton galvanisé, connecteur pour connecteurs automobiles
| Série | 090 II Series |
| Type de Connecteur | Terminal |
| Genre | Male End |
| Joint | Unsealed |
| Largeur de la plaque d'insertion | 2.3mm (090) |
| Longueur de ligne | 0.85-1.25 mm² (18-16 AWG) |
| Méthode de contact | Brass |
| Traitements de surface | Tin-plated (Pre-tinned) |
| Spécifications | 26.7 x 2.9 x 2.9 mm |
| Nombre de broches | 10.3 mm |
| Méthode de termination | Crimp |
| Emballage | Coil packaging (4500 pieces per reel) |
N° Fabricant
ST740673-3740673-3
Véhicules Compatibles
Vehicle Wiring HarnessVehicle Electronic Control System
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
Professional supply of KET original ST740673-3 automotive connector terminal, belongs to the 090 II series unclosed male connector, contact width 2.3mm (090), using brass base material with tin plating, compatible with 0.85-1.25 mm² cable. The terminal length is 26.7mm, width 2.9mm, height 2.9mm, supports 18-16 AWG wire gauge, rated current is achieved through crimping for reliable connection. Widely used in automotive harnesses, electronic control system connectors, genuine stock, 4.5K/roll minimum order, meets industrial bulk demand.