Image non disponible
Filtre de ligne d'alimentation Schaffner FN5040-4.5-82 triphasé 4.5A 525VAC 13mH 2.2μF sortie sinusoïdale LC
| Courant Nominal | 4.5A |
| Tension | 525VAC |
| Compte des phases | Three Phase Three Wire System |
| Niveau de Grade | Single Stage |
| Inductance | 13mH |
| Capacité de stockage | 2.2μF |
| Filtre | LC Sine Wave Output Filter |
| Installation | Chassis Mounting |
| Type de terminal de connexion | Terminal Block |
| Température de Fonctionnement | -25°C ~ 70°C |
| Certification | cURus |
| Longueur maximale du câble du moteur | Depends on PWM frequency, see data sheet |
| Indice de Protection | IP00 |
N° Fabricant
FN5040-4.5-82
Véhicules Compatibles
Frequency InverterVariable Frequency Motor DriveRegenerative Motor Drive
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TE Connectivity / Schaffner Original FN5040-4.5-82 Power Line Filter, rated current 4.5A, voltage 525VAC, three-phase three-wire system, single-stage filtering. Built-in 13mH inductor and 2.2μF capacitor, forming an LC sinusoidal output filter, effectively eliminating high dV/dt, overvoltage and cable ringing generated by PWM motor drive, protecting motor insulation and reducing eddy current losses. Wide operating temperature -25°C to 70°C, enclosure mounting, terminal block wiring. Suitable for frequency inverters, regenerative motor drives and other industrial variable frequency applications, with cURus safety certification.
