Which equipment and machinery is sidakang-2815c-starter-pinion compatible with?

SIDAKANG 2815C Pignon d'arrêt de démarrage (10 dents petites) pour Steyr/Caterpillar/Mahindra (sidakang-2815c-starter-pinion) is compatible with: Steyr, Caterpillar 320D, Caterpillar 3508 Generator Set, Mahindra 2815H Tractor, Mahindra 3215H Tractor.

Which engines does part sidakang-2815c-starter-pinion fit?

SIDAKANG 2815C Pignon d'arrêt de démarrage (10 dents petites) pour Steyr/Caterpillar/Mahindra fits the following engines: CAT 3508, Mahindra 2815H, Mahindra 3215, Mahindra 3316, Mahindra 3616.

What are the technical specifications of sidakang-2815c-starter-pinion?

Key technical specifications of SIDAKANG 2815C Pignon d'arrêt de démarrage (10 dents petites) pour Steyr/Caterpillar/Mahindra: tooth_count: 10 teeth (small tooth count); gear_outside_diameter: 28.5mm; rotation_direction: CW (Clockwise); installation_hole_spacing: 11mm Unthreaded Hole; material: Alloy Steel; applicable_system: Starter (start motor).

Image non disponible

SIDAKANG 2815C Pignon d'arrêt de démarrage (10 dents petites) pour Steyr/Caterpillar/Mahindra

Q: What are the OEM and cross-reference part numbers for SIDAKANG_2815C?

The OEM and interchange cross-reference numbers for SIDAKANG 2815C Pignon d'arrêt de démarrage (10 dents petites) pour Steyr/Caterpillar/Mahindra include: 2815C.

Livraison Gratuite Express Garantie Usine de 3 Ans Retour Sans Frais 90 Jours Support Dédié 24/7

Nombre des dents	10 teeth (small tooth count)
diamètre extérieur de la dentée	28.5mm
Direction de rotation	CW (Clockwise)
espacement des trous d'installation	11mm Unthreaded Hole
Matériau	Alloy Steel
Système applicable	Starter (start motor)

N° Fabricant

SIDAKANG_2815C

N° OEM

2815C

N° Moteur

CAT 3508Mahindra 2815HMahindra 3215Mahindra 3316Mahindra 3616

N° Interchangeable

2815C

Véhicules Compatibles

SteyrCaterpillar 320DCaterpillar 3508 Generator SetMahindra 2815H TractorMahindra 3215H Tractor

Systèmes Électriques et Électroniques - Encyclopédie Industrielle

SIDAKANG original 2815C starter gear with small 10 teeth design, specially matched for Steyr and some Caterpillar, Mahindra models. Compatible with a variety of construction and agricultural engine models, it can be used as a direct replacement part. Gear outer diameter 28.5mm, 11mm threadless mounting hole, standard CW rotation. Suitable for Caterpillar 3508, Mahindra 2815H, 3215 series engines, preferred component for starter system maintenance.