Filtre de ligne de courant EMC/EMI TDK-Lambda RSAL-2002W monophasique 2A 250V montage sur base avec bornes
| Série | RSAL Series |
| Filtre | Single Phase EMC/EMI Line Filter |
| Courant Nominal | 2A |
| Tension | 250VAC / 250VDC |
| Installation | Base Mount / Chassis Mount |
| Méthode de termination | Wired (Wire Leads / Lead Wire) |
| Niveau de Grade | Single Stage |
| Inductance | Common mode/differential mode parameters see data sheet (typical values 0.5-8mH / 0.7-30mH depending on frequency) |
| Ligne de test de pression au sol | Wire-to-wire 1450VDC / wire-to-ground 2250VDC (standard safety requirements) |
| Courant de fuite maximal | Low leakage current option available (typically < 0.5mA @ 250V/60Hz) |
| Température de Fonctionnement | -25°C to +85°C (including derating curve) |
| Classe de résistance au feu | UL 94V-0 |
| Certification | UL 1283, CSA C22.2 No.8, EN 60939 (ENEC), RoHS directive compliant |
| Caractéristiques | High-pressure pulse attenuation compatible, compact multi-purpose design |
| Type d'Encapsulation | Plastic housing, metal base for heat dissipation |
| Type de Connecteur | 4 pins (L, N, L', N') + ground screw/bolt |
N° Fabricant
RSAL-2002W
N° Interchangeable
RSAL-2002WLRSAL-2002ALRSEL-2002WNS-RSAL-2002W
Véhicules Compatibles
Industrial Control Power SupplyMedical Electronic EquipmentTest and Measurement InstrumentsGeneral Single Phase Equipment Power Entry
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TDK-Lambda RSAL-2002W single phase power line filter, rated current 2A, rated voltage 250VAC/VDC, base mounted, lead terminals. The RSAL series has the ability to attenuate high voltage pulses, meets UL, CSA, EN safety certifications, low leakage current design, widely used in industrial control power supplies, medical equipment, test instruments and other general electromagnetic compatibility (EMC) suppression scenarios. Provides original data sheets, pin definitions and selection comparison.