Filtre de ligne électrique monophasique TDK-Lambda RSEL-2006AL 6A 250VAC Montage sur base Connecteur de branchement rapide Conception à faible courant de fuite
| Série | RSEL Series |
| Filtre | Single Phase EMI/EMC Power Line Filter |
| Courant Nominal | 6A |
| Tension | Line-to-line 1450VDC / line-to-ground 2250VDC (standard test conditions) |
| Installation | Base / Chassis Mount |
| Type de câble | Fast-on / Quick Connect terminal |
| Étape de circuit | Single Stage |
| Courant de fuite maximal | Low leakage current design (typical value < 0.5mA @ 250VAC/60Hz) |
| Température de Fonctionnement | -25°C to +85°C (including derating) |
| Catégorie climatique | 25/085/21 (IEC 60068-1) |
| Classe de résistance au feu | UL 94V-0 |
| Certification | UL 1283 (E71589), CSA C22.2 No.8 (LR46432), ENEC (IEC/EN 60939-2), RoHS Directive (EU 2015/863) |
| Système d'application | Switched-Mode Power Supply, Inverter, Servo Drive, Industrial Equipment Power Entry |
| Type d'Encapsulation | Metal housing, providing good shielding effect |
| Poids | Approx. 60g |
N° Fabricant
RSEL-2006AL
N° Interchangeable
RSEL-2006ALRSEL2006AL
Véhicules Compatibles
Industrial Automation Control CabinetSwitching Power Supply ModuleMedical Electronic EquipmentTesting and Measuring InstrumentsConsumer Electronic Products
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TDK-Lambda RSEL-2006AL Single-Phase EMI/EMC power line filter, rated current 6A, rated voltage 250VAC, base mounting design, fast connect terminal wiring. Compliant with UL, CSA, ENEC safety certification, low leakage current design, widely used in electromagnetic interference suppression for industrial automation equipment, power modules, medical equipment and consumer electronics. Provides original data sheets, inventory price inquiry and selection support.