Filtre de ligne EMC TDK-Lambda RSEN-2006L monophasique 6A 250VAC avec bloc de bornes montage sur base/DIN rail
| Série | RSEN Series |
| Filtre | Single Phase EMI/EMC Power Line Filter |
| Courant Nominal | 6A |
| Tension | 250VAC / 250VDC |
| Installation | Base mounting / DIN rail mounting (L suffix indicates DIN rail mounting foot) |
| Type de Connecteur | Terminal Block |
| Température de Fonctionnement | -25°C to +85°C |
| Courant de fuite maximal | Low leakage current design (specific values according to data sheet, typically < 1mA @ 250V/50Hz) |
| Résistance DC Totale | 110 mΩ (typical value, total) |
| Taille du carter | Width 87mm × Height 35mm × Depth approx. 50mm (including terminals) |
| Poids | Approx. 230g |
| Certification | UL/cUL, ENEC, CSA, RoHS, REACH |
| Type de freinage | Common-mode/differential-mode attenuation (refer to the attenuation curve in the data sheet) |
| Scénario d'application | General single-phase EMC countermeasure, suppression of conducted disturbance |
N° Fabricant
RSEN-2006LRSEN-2006RSEN-2006DRSEN-2006LD
N° Interchangeable
RSEN-2006RSEN-2006DRSEN-2006LDRSAN-2006RSEV-2006
Véhicules Compatibles
Industrial Automation Control CabinetSwitching Power Supply ModuleMedical Electronic EquipmentTest and Measurement InstrumentsInverter/Servo Drive
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TDK-Lambda RSEN-2006L single phase power line filter, rated current 6A, rated voltage 250VAC, terminal block wiring, supports mounting on base and DIN rail (L suffix). Low leakage current design, complies with RoHS standard, widely used in industrial automation equipment, power modules, medical equipment and test measurement instruments for EMI/EMC suppression. Complete data manual and original factory technical support provided.