Filtre de ligne électrique monophasique TDK-Lambda RSEN-2006LD 6A 250VAC monté sur rail DIN
| Courant Nominal | 6A |
| Tension | 250VAC / 250VDC (50/60Hz) |
| Compte des phases | Single-Phase |
| Installation | DIN rail mounting (compatible with TS-35/EN60715), chassis bottom plate mounting |
| Type de Connecteur | Screw Terminal / Terminal Block |
| Courant de fuite maximal | Standard Type / Optional Low Leakage Current Type |
| Température de Fonctionnement | -25°C ~ +85°C (Reduced Usage Required) |
| Gamme de Température de Stockage | -40°C ~ +85°C |
| Certification | UL1283 (E62388), CSA C22.2 No.8, EN60939-2 (VDE), RoHS, REACH |
| protection contre la surpression | II (IEC 60664-1) |
| Niveau de pollution | 2 |
| Norme de test | Wire-to-Wire: 1450VDC / Wire-to-Ground: 2250VDC (1 minute) |
| Classe de résistance au feu | UL94V-0 (housing and resin) |
| Temps moyen entre les pannes | > 1,000,000 hours (MIL-HDBK-217F, 25°C) |
| Matériau | Metal Shell (Excellent Shielding Effect) |
N° Fabricant
RSEN-2006LDRSEN-2006DRSEN-2006LRSEN-2006
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TDK-Lambda RSEN-2006LD Single Phase Power Line EMI Filter, rated current 6A, rated voltage 250VAC/DC, standard DIN rail (TS-35) installation, screw terminal wiring, compliant with UL1283/CSA/EN60939 safety standards, RoHS/REACH compliant, optional low leakage current design, widely used for industrial automation power supplies, inverters, servo drives and EMC conduction interference suppression for general electronic equipment.