Filtre EMI mono phase TDK-Lambda RSEN-2010 10A 250VAC bloc de bornes montage sur rail DIN
| Série | RSEN Series |
| Courant Nominal | 10 A |
| Tension | 250 VAC / 250 VDC (50/60 Hz) |
| Compte des phases | Single-Phase |
| Niveau de filtration | Single Stage |
| Courant de fuite maximal | Maximum 0.5 mA (250 VAC, 60 Hz) |
| Ligne de test de pression au sol | 2250 VDC (1 minute) |
| Valeur initiale de la résistance d'isolement | > 100 MΩ (500 VDC) |
| Température de Fonctionnement | -25°C to +85°C (Operation at reduced rating above 50°C) |
| Installation | DIN Rail Mounting (TS-35/7.5 & TS-35/15) |
| Type de Connecteur | Screw Terminal Block |
| Classe de résistance au feu | UL 94V-0 |
| Certification | UL 1283, CSA C22.2 No. 8, EN 60939 (VDE), CE |
N° Fabricant
RSEN-2010RSEN-2010DRSEN-2010LDRSEN-2010LDDIN
N° OEM
RSEN-2010RSEN-2010DRSEN-2010LD
N° Interchangeable
285-2620-NDRSEN-2010D DISTI # 69687455MBS-1330-33
Véhicules Compatibles
Industrial Switching Power SupplyInverter/Servo DriveUPS Uninterruptible Power SupplyIndustrial Automation Control CabinetMedical Electronic EquipmentTest and Measurement Instruments
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
Original TDK-Lambda RSEN-2010 series single-phase EMC/EMI filter, rated current 10A, rated voltage 250VAC/VDC, single-stage filtering, terminal block wiring, supports DIN rail mounting (LDDIN suffix). Widely used in electromagnetic interference suppression for industrial power supplies, inverters, UPS and automation equipment, compliant with UL, CSA, VDE and CE certification standards. Offers RSEN-2010, RSEN-2010D, RSEN-2010LD and other suffix models for selection, in stock and ready to ship.