Filtre de ligne d'alimentation monophasique TDK-Lambda RSEN-2010D 10A 250VAC avec bloc de borniers DIN - Module de réduction du bruit EMC/EMI
| Courant Nominal | 10A |
| Tension | 250VAC / 250VDC |
| Compte des phases | Single-Phase |
| Niveau de filtration | Single Stage |
| Installation | DIN Rail Mounting (compatible with bottom plate mounting) |
| Type de terminal de connexion | Terminal block/screw self-locking |
| Température de Fonctionnement | -25℃ ~ +85℃ |
| Essai à haute pression | Wire-to-Wire 250VAC / Wire-to-Ground 2500VAC (1 minute) |
| Valeur standard de courant de fuite | Standard type / Optional low leakage current type |
| Résistance DC Totale | Approx. 0.02Ω (Total) |
| Poids | Approx. 260g |
| Matériau | Flame-retardant plastic housing (UL94 V-0) |
| Certification | UL 1283, CSA C22.2 No.8, EN 60939 (IEC 60939), RoHS |
| Série | RSEN Series (3A~300A) |
| Caractéristiques | Self-locking screw, Open/close type terminal cover, High voltage pulse tolerance, Miniaturized design |
N° Fabricant
RSEN-2010DRSEN-2010RSEN-2010LRSEN-2010LD
N° OEM
RSEN-2010DRSEN-2010
N° Interchangeable
NS-RSEN-2010DB84143A0008R105FN3288-160-SBT-0210T
Véhicules Compatibles
Medical EquipmentIndustrial Automation Control CabinetSwitching Power Supply ModuleInverter/Servo DriveTest and Measurement InstrumentsCommunication Base Station EquipmentRailway Traffic Signal System
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TDK-Lambda RSEN-2010D single-phase power line EMC/EMI filter, rated 10A 250VAC/VDC, DIN rail mounted, terminal block wiring. Features high bandwidth high attenuation, low leakage current, withstand voltage 2500V, -25℃~+85℃ wide temperature operation. Certified by UL/CSA/EN, suitable for anti-interference scenarios such as medical equipment, industrial automation, power modules, etc. Original genuine, in stock supply.