Which equipment and machinery is tdk-lambda-rsen-2016ld-emi-filter-16a-250vac-din-rail compatible with?

Filtre EMI monophasique TDK-Lambda RSEN-2016LD 16A 250VAC sur rail DIN de faible courant de fuite (tdk-lambda-rsen-2016ld-emi-filter-16a-250vac-din-rail) is compatible with: Industrial Automation Control Cabinet, Switching Power Supply Equipment, Medical Electronic Equipment, Inverter/Servo Drive, Industrial Machinery Equipment.

What are the technical specifications of tdk-lambda-rsen-2016ld-emi-filter-16a-250vac-din-rail?

Key technical specifications of Filtre EMI monophasique TDK-Lambda RSEN-2016LD 16A 250VAC sur rail DIN de faible courant de fuite: voltage: 250 VAC / 250 VDC; rated_current: 16 A; phase_count: Single-Phase; leak_current_standard_value: Low leakage current (L suffix, typical < 0.5mA @ 250V/60Hz); installation: DIN guide installation (TS35/EN60715); connection_terminal_type: Screw Terminal Block.

Filtre EMI monophasique TDK-Lambda RSEN-2016LD 16A 250VAC sur rail DIN de faible courant de fuite

Livraison Gratuite Express Garantie Usine de 3 Ans Retour Sans Frais 90 Jours Support Dédié 24/7

Tension	250 VAC / 250 VDC
Courant Nominal	16 A
Compte des phases	Single-Phase
Valeur standard de courant de fuite	Low leakage current (L suffix, typical < 0.5mA @ 250V/60Hz)
Installation	DIN guide installation (TS35/EN60715)
Type de terminal de connexion	Screw Terminal Block
Niveau de filtration	Single Stage
Température de Fonctionnement	-25°C to +85°C (derated to 100°C)
Certification	UL 1283, CSA C22.2 No.8, EN/IEC 60939
Matériau	Flame-retardant plastic (UL94 V-0)
Série	RSEN Series (3A-300A)

N° Fabricant

RSEN-2016LDRSEN-2016LRSEN-2016DRSEN-2016

Véhicules Compatibles

Industrial Automation Control CabinetSwitching Power Supply EquipmentMedical Electronic EquipmentInverter/Servo DriveIndustrial Machinery Equipment

Systèmes Électriques et Électroniques - Encyclopédie Industrielle

TDK-Lambda RSEN-2016LD Single Phase EMC/EMI Power Cord Filter, rated current 16A, rated voltage 250VAC/VDC, supports DIN rail installation (TS35), terminal strip wiring. Low leakage design (L suffix), compliant with UL, CSA, EN safety certifications, widely used in electromagnetic interference suppression for industrial automation, switching power supplies, medical equipment and inverters, etc.