Image non disponible
Filtre de ligne d'alimentation à haute atténuation EMC TDK-Lambda RSHN-2010L monophasique 250V 10A connecteur visé faible courant de fuite
| Série | RSHN Series |
| Filtre | Single-phase High Attenuation EMC/EMI Power Line Filter |
| Tension | 250 VAC / 250 VDC |
| Courant Nominal | 10 A |
| Niveau de filtration | Two-Stage |
| Type de Connecteur | Screw terminal |
| Installation | Base Mounting / Optional DIN Rail Mounting (RSHN-2010LD) |
| Courant de fuite maximal | Low Leakage Current Design (Suitable for Medical/Sensitive Equipment) |
| Ligne de test de pression au sol | Line-to-ground 2500 VAC / 60s |
| Valeur initiale de la résistance d'isolement | 100 MΩ min (line-to-ground, 500VDC) |
| Température de Fonctionnement | -25°C to +85°C (Check Data Manual for Derating Curve) |
| Classe de résistance au feu | UL 94V-0 |
| Certification | UL 1283, CSA C22.2 No.8, EN 60939 (VDE), RoHS Directive |
| Matériau | Metal housing (good shielding effect) |
| Système d'application | Switched-mode power supply, inverter, UPS, input end conduction interference suppression for medical equipment |
N° Fabricant
RSHN-2010LRSHN-2010RSHN-2010LD
N° Interchangeable
285-2747-ND46R0420NS-RSHN-2010LRSHN2010L
Véhicules Compatibles
Single-phase switch power supply inputIndustrial automation control cabinetMedical electronic equipmentTesting and measuring instrumentsInverter/servo drive front end
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TDK-Lambda RSHN-2010L Single Phase High Attenuation EMC/EMI Power Line Filter, rated voltage 250VAC/VDC, rated current 10A, two-stage filtering, screw terminal wiring, base mounting/DIN rail optional, low leakage current design, compliant with RoHS standard. Widely used in industrial automation, medical equipment, conduction interference suppression at the input end of switching power supplies. Provides original data sheets, pin diagrams, and selection support.