Filtre de ligne d'alimentation TDK-Lambda RTAN-5030 triphasé 30A 500V montage sur base terminal/DIN rail
| Série | RTAN Series |
| Tension | 500 VAC / 500 VDC |
| Courant Nominal | 30 A |
| Compte des phases | 3-Phase / 3-Line, Delta |
| Filtre | Power Cable EMI/EMC Filter (Single Stage) |
| Performance d'Atténuation | Differential Mode/Common Mode Optimization (Pulse Attenuation) |
| Type de Connecteur | Connector / Screw Terminal (Terminal Block / Screw Terminals) |
| Installation | Base Mounting / Chassis Mounting; DIN Rail Mounting (RTAN-5030D Variant) |
| Fréquence de travail | 50/60 Hz |
| Courant de fuite maximal | Typical < 30mA (depending on specific IEC 60939 test conditions) |
| Ligne de test de pression au sol | Line-to-line 1450 VDC / line-to-ground 2250 VDC (or 2700 VAC for 2 seconds) |
| Valeur initiale de la résistance d'isolement | > 100 MΩ (500 VDC) |
| Température de Fonctionnement | -25°C ~ +85°C (Under rated current), +100°C (Downscaled use) |
| Gamme de Température de Stockage | -40°C ~ +85°C |
| Indice de Protection | IP20 (Terminal Part) |
| Classe de résistance au feu | UL 94 V-0 |
| Spécifications | Approximately 140 x 70 x 42 mm (refer to RTAN-5020/5030 shared housing specifications) |
| Poids | Approximately 570 g |
| Certification | UL 1283, CSA C22.2 No.8, EN 60939 (IEC 60939), RoHS, REACH |
| Temps moyen entre les pannes (Mil Hdbk 217F) | 4,012,519 hours (approximately 458,000 years) |
| Garantie | 5 Year |
| Conformité de l'efficacité énergétique | RoHS Compliant (Lead-Free), Halogen-Free |
N° Fabricant
RTAN-5030RTAN-5030DA575NAA-RTAN-001
N° Interchangeable
RTAN-5030DRTEN-5030RTEN-5030DRTHN-5030RTCN-5030C1S203600031326C1S203600031335RTAN5030D
Véhicules Compatibles
Industrial Automation Control CabinetVariable Frequency Drive/Servo Drive Input TerminalNumerical Control Machine Tool Electrical CabinetCommunication Base Station Power SystemMedical Equipment Power ModuleTest and Measurement Instruments
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TDK-Lambda RTAN-5030 series three-phase power line filters, rated current 30A, rated voltage 500VAC/VDC, connected by terminal block, support mounting on base and DIN rail (RTAN-5030D). This filter is designed for differential and common mode noise suppression, suitable for EMC improvement of industrial automation equipment, communication equipment, CNC machine tools and variable frequency drive input ends. Compliant with RoHS directive, 5-year warranty, MTBF up to 4 million hours. Replaceable models include RTAN-5030D, RTEN-5030, RTHN-5030, RTCN-5030 and other equivalent variants.