Filtre de ligne électrique triphasé TDK-Lambda RTCN-5006 6A 500VAC/VDC avec boîtier de bornes et montage sur pied
| Série | RTCN |
| Filtre | Power Line Filter / EMI Filter |
| Configuration de phase | Three-phase (delta) |
| Courant Nominal | 6A |
| Puissance Nominale | 500 VDC |
| Structure du circuit | Single Stage |
| Résistance DC Totale | 145 mΩ (typical value) |
| Type de Connecteur | Terminal Block / Screw Terminal |
| Installation | Base Mounting / Flange Mounting |
| Hauteur d'installation | A=120mm, B=63mm, C=42mm, D=110mm, E=53mm, F=M4, G=M4, φH=4.5mm |
| Couple d'installation | M4 Screw Approx. 1.2 N·m |
| Température de Fonctionnement | -25°C to +85°C (including 50°C rated value) |
| Courant de fuite maximal | Triangular connection without neutral line, extremely low relative leakage current |
| Certification | RoHS Compliant, UL Certified (E70775), cUL, ENEC |
| Type d'Encapsulation | Active |
| Fabricant | TDK-Lambda Americas Inc. / TDK Electronics |
| Manuel des données | 6 Pages |
| Scénario d'application | Design for secondary side of three-phase inverter, used to suppress conducted interference |
N° Fabricant
RTCN-5006
N° Interchangeable
RTCN-5006-ND
Véhicules Compatibles
Three-phase inverter secondary sideIndustrial frequency converterServo driverUPS uninterruptible power supplyIndustrial automation equipment
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TDK-Lambda RTCN-5006 series three-phase power line filter, rated current 6A, rated voltage 500VAC/500VDC, designed for the secondary side of three-phase inverters. Single-stage delta configuration, terminal block wiring, base flange mounting, DC resistance 145mΩ. Compliant with RoHS standard, widely used for EMI/EMC suppression in industrial inverters, servo drives, UPS power supplies, and other equipment. Provides original data sheets, dimension drawings, and selection support.