Filtre de ligne d'alimentation triphasé TDK-Lambda RTHB-5006 6A 500VAC deux niveaux module de filtrage connecteur terminal montage sur base
| Série | RTHB Series |
| Filtre | Three Phase Delta EMC/EMI Power Line Filter |
| Courant Nominal | 6A |
| Tension | Line-to-line 1450VDC / Line-to-ground 2250VDC (typical value, refer to data sheet) |
| Niveau de filtration | Two-Stage |
| Type de Connecteur | Screw terminal block/screw terminal |
| Installation | Chassis Mount / Base Mount |
| Courant de fuite maximal | Approx. 7.5mA Max. (Typical Value at 500VAC/60Hz) |
| Température de Fonctionnement | -25°C to +85°C (or -40°C to +85°C, depending on the specific data manual version) |
| Catégorie climatique | 25/085/21 (IEC 60068-1) |
| Classe de résistance au feu | UL 94V-0 |
| Certification | UL 1283, CSA C22.2 No.8 (cUL), EN 60939 (VDE), RoHS |
| Classement Sccr | 5kA (with suitable fuse) |
| Type d'Encapsulation | Metal Housing (Aluminum/Steel), Rectangular |
| Système d'application | Noise suppression at the input end of three-phase equipment with high attenuation demand |
N° Fabricant
RTHB-5006RTHB SERIES
N° Interchangeable
RTEN-5006RTAN-5006RTHC-50063SUP-HU30-ER-6NS-RTHB-5006
Véhicules Compatibles
Industrial Automation Control CabinetInverter/Inverter DriveServo Drive SystemUninterruptible Power Supply (UPS)Switched-Mode Power Supply EquipmentNumerical Control Machine ToolRobot Control System
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TDK-Lambda RTHB-5006 is a high attenuation three-phase power line filter (Delta delta connection), rated current 6A, rated voltage 500VAC, with two-tier filter design and screw terminal wiring, supports base/case installation. Compliant with UL certification (short-circuit current rating up to 5kA), widely used in industrial automation equipment, inverters, servo drives and power system EMI/EMC suppression. Provides original data sheets, pin diagrams and selection support.