Which equipment and machinery is te-connectivity-171630-1-econoseal-j-mk2-female-terminal compatible with?

TE Connectivity 171630-1 Econoseal J Mark II Connecteur Mère Étanche 24-20AWG Soudage de Plomb 1.8mm Série Connecteur Terminal Automobile (te-connectivity-171630-1-econoseal-j-mk2-female-terminal) is compatible with: General Motors Wiring Harness, Engine Compartment Sensor Connection, ECU Control Unit Wiring, Body Control Module (BCM) Wiring Harness, Construction Equipment/Commercial Vehicle Harsh Environment Connection, New Energy Vehicle Low Voltage Wiring Harness.

What are the technical specifications of te-connectivity-171630-1-econoseal-j-mk2-female-terminal?

Key technical specifications of TE Connectivity 171630-1 Econoseal J Mark II Connecteur Mère Étanche 24-20AWG Soudage de Plomb 1.8mm Série Connecteur Terminal Automobile: manufacturer: TE Connectivity (Tyco Electronics/AMP); series: Econoseal J Mark II (E-J MK-2); connector_type: Crimp; insertion_length: Width 1.8mm (.071 in) × thickness 0.64mm (.025 in); wire_gauge: 24 - 20 AWG; wire_diameter_area: 0.2 - 0.5 mm².

TE Connectivity 171630-1 Econoseal J Mark II Connecteur Mère Étanche 24-20AWG Soudage de Plomb 1.8mm Série Connecteur Terminal Automobile

Q: What are the OEM and cross-reference part numbers for 171630-1?

The OEM and interchange cross-reference numbers for TE Connectivity 171630-1 Econoseal J Mark II Connecteur Mère Étanche 24-20AWG Soudage de Plomb 1.8mm Série Connecteur Terminal Automobile include: 171630-5, 171662-1, 171662-4, 171662-5, 171631-1, 171699-1, CKK001-1.8FS.

Livraison Gratuite Express Garantie Usine de 3 Ans Retour Sans Frais 90 Jours Support Dédié 24/7

Fabricant	TE Connectivity (Tyco Electronics/AMP)
Série	Econoseal J Mark II (E-J MK-2)
Type de Connecteur	Crimp
Longueur d'insertion	Width 1.8mm (.071 in) × thickness 0.64mm (.025 in)
Diamètre du fil	24 - 20 AWG
Surface du diamètre du fil	0.2 - 0.5 mm²
Plaque de base	Brass
Traitements de surface	Full Tin Plated (Pre-tin Plated)
Installation	Cable Installation / Free Suspension
Indice de Protection	IP67/IP69K (when equipped with matching sealing and protective sleeve)
Température de Fonctionnement	-40°C to +125°C
Courant Nominal	Maximum 10A (20AWG) / 7A (24AWG) @ 23°C
Tension	1000 VAC (1 minute)
Résistance de contact maximale	≤ 5 mΩ (Initial)
Valeur initiale de la résistance d'isolement	≥ 20 MΩ (500 VDC)
Emballage	Spool pack (standard 6000 pcs/spool) / Loose
Norme de conformité	RoHS Compliant, Pb-Free, ELV Compliant
Pays d'Origine	Japan
Code HS	8536909000
Connecteur	171631-1 (Tab Contact)
Protège-coussinets de joint de correspondance	Econoseal J series silicone sealing rings (to be ordered separately)
Type de Soudure	TE 91500-1 Manual Clamp / Automated Soldering Mold (Applicator)

N° Fabricant

171630-10-0171630-1AMP 171630-1TYCO 171630-1

N° Interchangeable

171630-5171662-1171662-4171662-5171631-1171699-1CKK001-1.8FS

Véhicules Compatibles

General Motors Wiring HarnessEngine Compartment Sensor ConnectionECU Control Unit WiringBody Control Module (BCM) Wiring HarnessConstruction Equipment/Commercial Vehicle Harsh Environment ConnectionNew Energy Vehicle Low Voltage Wiring Harness

Systèmes Électriques et Électroniques - Encyclopédie Industrielle

Original Genuine TE Connectivity (Tyco/AMP) 171630-1 Automotive Mother Terminal, belongs to the Econoseal J Mark II series, designed for waterproof sealing connections in harsh environments. Compatible with 24-20AWG (0.2-0.5mm²) wire diameter, tin-plated brass material, with 1.8mm plug width. Widely used in engine compartment sensors, ECU control systems and body wiring harnesses, with high temperature resistance, vibration resistance, and reliable IP67 waterproof sealing performance. Available in coil packaging (6000pcs/roll) and loose packaging, compliant with RoHS standards, supporting automated crimping tools.