TE Connectivity 20VR6 Corcom R Series Filtre de ligne électrique EMI/RFI monophasique à deux étapes 20A 250VAC Montage sur flange connecteur à vis
| Filtre | EMI/RFI Power Line Filter (Single Phase, Two Stage T-Type) |
| Courant Nominal | 20 A |
| Tension | 250 VAC (50/60 Hz) |
| Courant de fuite maximal | 700 µA (250 VAC, 50 Hz) / 0.4 mA (120 VAC, 60 Hz) |
| Capacité | 0.303 µF (303 nF) |
| Inductance | 880 µH |
| Longueur d'insertion | 15 dB @ 0.15 MHz; 50 dB @ 30 MHz (typical value, 50Ω system) |
| Tension hipot | Line-to-ground 2250 VDC (1 minute); Line-to-line 1450 VDC (1 minute) |
| Installation | Flange mounting / Enclosure mounting |
| Type de câble | Bolt terminal / stud (8-32 UNC) |
| Température de Fonctionnement | -10°C to +40°C (de-rated to 85°C under full load) |
| Certification | UL 1283, CSA C22.2 No. 8, VDE (EN 60939), RoHS |
| Série | Corcom R series (two-stage universal type) |
| Numéro de pièce du fabricant | 1-6609032-9 |
| Numéro Digi Key | CCM1361-ND |
N° Fabricant
20VR61-6609032-9CCM1361-ND
N° Interchangeable
F731220VR120VP620VK620VB120VS120AYT6C
Véhicules Compatibles
Industrial Control EquipmentSwitching Power SupplyMedical Electronic EquipmentInverter/Servo DriveTest and Measurement InstrumentsTelecommunications/Network Equipment
Systèmes Électriques et Électroniques - Encyclopédie Industrielle
TE Connectivity TE Connectivity 20VR6 Single Phase Two Stage T Type EMI/RFI Power Line Filter, rated current 20A, rated voltage 250VAC, flange mounting, screw terminal. Corcom R Series designed for low impedance loads and noisy RFI environments, providing excellent common mode/differential mode suppression performance, leakage current up to 700µA, compliant with UL/CSA/VDE certification, widely used in industrial control, power equipment and medical electronic equipment EMC improvement.