XZR8®
Holset 1004349679 Turbocharger Assembly

Holset 1004349679 Turbocharger Assembly


Express Free Shipping
3-Year Factory Warranty
90-Day Hassle-Free Returns
24/7 Dedicated Support
Turbocharger ModelHolset HX55
Compressor Inducer Diameter76.2 mm
Compressor Exducer Diameter110 mm
Turbine Wheel Diameter88 mm
Turbine Housing A-R1.15
Wastegate ActuationPneumatic / Electronic (Application Specific)
Oil Inlet ThreadM18 x 1.5
Oil Outlet Flange4-Bolt Pattern
Compressor Outlet Diameter4 inch (101.6 mm)
Turbine Inlet FlangeT4 Divided Volute
Rotation DirectionClockwise (Viewed from Compressor Side)
Balancing GradeG2.5 / ISO 1940
Net Weight30 kg
Package Dimensions45 × 45 × 45 cm

Manufacturer No.

  • 1004349679
  • HX55
  • 3593606
  • 4041873

OEM Part No.

  • 1004349679
  • 612630060001

Engine Part No.

  • Weichai WP10
  • Weichai WP12
  • Weichai WP13
  • Cummins M11
  • Cummins ISM

Interchange No.

  • 3593606
  • 4041873
  • HX55
  • NP-0736CHRA

Fitment Vehicles

  • Sinotruk Howo 371
  • Sinotruk Howo 420
  • Shacman F3000
  • Faw J6P
  • Shantui SD22 Dozer
  • XCMG XE215 Excavator
  • LiuGong CLG922 Excavator
This turbocharger assembly utilizes the Holset HX55 compressor and turbine frame configuration, engineered for high-boost pressure ratios required by Weichai WP10 and WP12 heavy-duty diesel platforms. The unit features a forged milled compressor wheel (FMW) for improved aerodynamic efficiency and burst containment margin. The turbine housing integrates a divided volute design to optimize pulse energy utilization from the exhaust manifold, reducing turbo lag and improving transient response. The center housing rotating assembly (CHRA) incorporates a fully floating bronze bearing system with piston ring seals on both turbine and compressor ends, lubricated and cooled by engine oil supply. The wastegate actuator is calibrated to OEM boost pressure specifications for the target engine calibration. This assembly serves as a direct bolt-on replacement for the OEM part number 1004349679, requiring no modifications to oil feed, drain, or intake/exhaust piping interfaces. Cross-reference interchange data confirms compatibility with Holset service part numbers 3593606 and 4041873, commonly associated with Cummins M11 and ISM platforms sharing the HX55 architecture. Verification of the engine nameplate and turbocharger nameplate (located on the compressor housing) is required prior to installation to ensure correct trim matching.