XZR8®
Denso 113-3499 10PA15C A/C Compressor Assembly

Denso 113-3499 10PA15C A/C Compressor Assembly


Express Free Shipping
3-Year Factory Warranty
90-Day Hassle-Free Returns
24/7 Dedicated Support
Compressor TypeSwash Plate 10PA15C
Rated Voltage24V
Displacement150 cc/rev
Pulley Diameter152 mm
Pulley Grooves1 PK (Single Groove)
RefrigerantR134a
Coil Current3.5 A at 24V
Pressure Relief Valve3.8 MPa
Cut-Out Pressure0.2 MPa
Mounting Bolt PatternCaterpillar 3306/3406 Dual Bolt
Port ConnectionSAE J639 R134a Quick Coupler
Housing MaterialAluminum Alloy
Rotation DirectionClockwise (Viewed from Pulley)
Net Weight6.5 kg
Package Dimensions28 × 18 × 18 cm

Manufacturer No.

  • 447200-1095
  • 447200-1741
  • 447200-4051
  • 447200-0246
  • DCP99814

OEM Part No.

  • 113-3499
  • 4333459
  • 20Y9793111
  • 42C0711210
  • 1959118990
  • AT215510
  • 14X-Z11-8580
  • 14X-911-17400
  • 0K2426K00A

Engine Part No.

  • Caterpillar 3306
  • Caterpillar 3406

Interchange No.

  • 33770-50050
  • 15404-90
  • 421-072-1520
  • 20Y97-98130
  • KTT090305
  • LW30318
  • 51-0916
  • CO-1038CA
  • 14XZ118580

Fitment Vehicles

  • Caterpillar 350
  • Caterpillar 350L
  • Caterpillar 375
  • Caterpillar 375L
  • Caterpillar 330LC
  • Caterpillar 370
  • Caterpillar 270LC
  • Caterpillar 330LCR
  • Caterpillar 450LC
  • Caterpillar 200LC
  • Caterpillar 230LC
  • Caterpillar 550LC
The Denso 10PA15C swash plate compressor serves as original equipment for Caterpillar heavy machinery air conditioning systems. Designed for 24-volt electrical systems, the unit features a 152 mm diameter single-groove pulley compatible with poly-V belts. The compressor displaces 150 cc per revolution and operates with R134a refrigerant. The clutch coil draws approximately 3.5 amperes at 24 volts. Mounting configuration follows Caterpillar 3306 and 3406 engine bracket patterns with dual bolt holes spaced for direct installation. Internal components include high-pressure relief valve set at 3.8 MPa and low-pressure cutoff switch calibrated to 0.2 MPa. The aluminum housing incorporates integrated manifold ports for suction and discharge lines with O-ring seals. Service ports accept standard SAE J639 R134a quick couplers. Unit weighs 6.5 kg dry weight without refrigerant charge.