XZR8®
Rule 25SA Automatic Bilge Pump Assembly
Rule 25SA Automatic Bilge Pump Assembly - Image 2
Rule 25SA Automatic Bilge Pump Assembly - Image 3
1 / 3

Rule 25SA Automatic Bilge Pump Assembly


Express Free Shipping
3-Year Factory Warranty
90-Day Hassle-Free Returns
24/7 Dedicated Support
Rated Voltage12V DC
Flow Rate500 GPH (1893 LPH)
Output Current1.9 A
Outlet Diameter3/4 inch (19 mm)
Operation ModeAutomatic Electronic Sensing (Impeller Resistance)
Sensing Distance2.5 minutes
Motor ProtectionIgnition Protected, Double Insulated, Overheat Protection
Shaft MaterialStainless Steel
Dry Run CapabilityNon Burn-out Design
Backflow PreventionIntegrated Check Valve
ComplianceISO 8846 Marine Ignition Protection
Net Weight0.4 kg
Package Dimensions15 × 10 × 10 cm

Manufacturer No.

  • 25SA
  • 25SA-24
The Rule 25SA series is a 500 GPH (1893 LPH) automatic submersible bilge pump designed for 12V DC marine electrical systems. It utilizes electronic sensing technology based on impeller resistance to detect water presence, activating every 2.5 minutes for a one-second check cycle. This eliminates the requirement for a separate float switch. The pump features an ignition-protected, double-insulated long-stack motor with a stainless steel shaft. It is engineered for non burn-out operation when running dry and includes an integrated backflow preventer to reduce hose drainage back into the bilge. The outlet port accommodates 3/4 inch (19 mm) ID hose. The unit complies with ISO 8846 marine ignition protection standards.