XZR8®
Hydropack 5129493 Hydraulic Gear Pump Assembly
Hydropack 5129493 Hydraulic Gear Pump Assembly - Image 2
1 / 2

Hydropack 5129493 Hydraulic Gear Pump Assembly


Express Free Shipping
3-Year Factory Warranty
90-Day Hassle-Free Returns
24/7 Dedicated Support
Pump TypeSingle Section Gear Pump
Displacement15 cc/rev
Rated Flow14.5 GPM
Maximum Pressure3045 PSI (210 bar)
Drive TypeKeyed Shaft
Mounting StyleFlange Mount
RotationClockwise (Viewed from Shaft End)
Pressure Relief ValveNo
Housing MaterialAluminum Alloy
Net Weight1.20 kg
Package Dimensions18 × 12 × 12 cm

Manufacturer No.

  • C42X
  • C42XP4MS
  • KGp2e2

OEM Part No.

  • 5129493
  • 5179726
  • 5169041
  • 510625063
  • 84530167
  • 73328633
  • 91838765

Interchange No.

  • HF5179726
  • NH5129493
  • MZ-HW5129493
  • C42XP4MS

Fitment Vehicles

  • New Holland TN55
  • New Holland TN75
  • New Holland TN90
  • New Holland 4835
  • New Holland 5635
  • New Holland 6635
  • New Holland 7635
  • New Holland 8160
  • New Holland 8360
  • New Holland F110
  • New Holland TL80A
  • Case IH JX70U
  • Case IH JX80
  • Case IH JX80U
  • Case IH JX90U
  • Fiat 72.94
  • Fiat 82.94
  • Fiat 88.94
The 5129493 hydraulic gear pump is engineered as a direct replacement for OEM part numbers 5129493, 5179726, 5169041, 510625063, and 84530167. It utilizes a single-section gear pump construction (Hydropack C42X series) with a keyed shaft drive and flange mounting interface. The unit delivers a rated flow of 14.5 GPM at a maximum operating pressure of 3045 PSI (210 bar) with a displacement of 15 cc/rev. It does not include an integrated relief valve. This pump serves the hydraulic lift and steering systems on specified New Holland TN and 40/50/60 series tractors, Case IH JX series tractors, and Fiat 90 series tractors. Material composition consists of aluminum alloy housing with hardened steel gears and shafts. The pump is designed for mineral-based hydraulic oils. Cross-reference interchange includes aftermarket numbers HF5179726, NH5129493, and MZ-HW5129493. Installation requires verification of shaft spline count, port orientation, and rotation direction against the original unit.