XZR8®
Genteq 5KCP39GGP993AS Blower Motor Assembly
Genteq 5KCP39GGP993AS Blower Motor Assembly - Image 2
1 / 2

Genteq 5KCP39GGP993AS Blower Motor Assembly


Express Free Shipping
3-Year Factory Warranty
90-Day Hassle-Free Returns
24/7 Dedicated Support
Horsepower1/3 HP
Rated Voltage208-230 VAC
Input Frequency60 Hz
Phase ConfigurationSingle Phase
Rated Speed1075 RPM
Number Of Speeds2-Speed (High/Low)
Frame Size48 Frame
Motor TypePSC (Permanent Split Capacitor)
Enclosure CodeOAO (Open Air Over)
Bearing MaterialSleeve
Shaft Diameter1/2 inch
Shaft Length3.5 - 6.0 inches
Rotation DirectionClockwise (CW)
Mounting Configuration3 Ears, Bolt Circle 9 & 10 inch
Required Capacitor7.5 MFD / 370 VAC
Rated Amperage2.3 - 2.6 A
Insulation ClassClass B
Thermal ProtectionAutomatic Reset
Certification TypeUL Recognized, CSA Certified
Net Weight5.5 kg

Manufacturer No.

  • 5KCP39GGP993AS
  • 5KCP39GGY923S
  • YDK-250-6B70
  • 20200

OEM Part No.

  • B13400312
  • B13400312S
  • BT1340027S
  • BT1340027
  • 11091205
  • CAP010753O

Interchange No.

  • 3S009
  • 6DLN0
  • K55HXRCL-1854
  • F48A95A76
  • 5KCP39GGY923S

Fitment Vehicles

  • Goodman Gas Furnace
  • Amana Gas Furnace
  • Janitrol Gas Furnace
  • GE Genteq Furnace
The Genteq 5KCP39GGP993AS is a permanent split capacitor (PSC) direct drive blower motor designed for residential gas furnace applications. It operates at 1/3 horsepower with a speed rating of 1075 RPM on 208-230 volt single-phase 60 Hz power. The motor features a 48 frame enclosure with open air-over (OAO) ventilation, sleeve bearings, and a 1/2 inch diameter shaft. It includes three mounting ears riveted to the shell with bolt circle diameters of 9 and 10 inches for flexible installation. A 7.5 MFD 370 VAC run capacitor is required for operation (not included). The motor is UL recognized and CSA certified. This part serves as a direct replacement for GE Genteq model 5KCP39GGY923S and Goodman OEM part numbers B13400312, BT1340027S, and 11091205. It cross-references to Dayton 6DLN0, Fasco 3S009, and AO Smith F48A95A76. Typical amperage draw ranges from 2.3 to 2.6 amps. Rotation is clockwise viewed from shaft end, though some aftermarket replacements offer reversible rotation.