XZR8®
Bobcat 6675779 Binary Pressure Switch
Bobcat 6675779 Binary Pressure Switch - Image 2
Bobcat 6675779 Binary Pressure Switch - Image 3
Bobcat 6675779 Binary Pressure Switch - Image 4
1 / 4

Bobcat 6675779 Binary Pressure Switch


Express Free Shipping
3-Year Factory Warranty
90-Day Hassle-Free Returns
24/7 Dedicated Support
Switch TypeBinary Pressure Switch (Normally Open Low / Normally Closed High)
Rated Voltage12/24V DC
Cut-Out Pressure390 psi
Cut-in Pressure260 psi
Opening Pressure26-28 psi Falling
Built-in Back Pressure28 psi Rising
Refrigerant CompatibilityR12 / R134a
Fitting TypeFemale Flare (SAE 7/16-20 UNF typical)
Electrical Connector2-Wire Packard/Weatherpack Style
Circuit FunctionCompressor Clutch Control / System Protection
Net Weight0.15 kg
Package Dimensions10 × 5 × 5 cm

Manufacturer No.

  • 6675779

OEM Part No.

  • 6675779

Interchange No.

  • 11-3212
  • 1578

Fitment Vehicles

  • Bobcat 331
  • Bobcat 334
  • Bobcat 337
  • Bobcat 341
  • Bobcat 773
  • Bobcat 863
  • Bobcat 864
  • Bobcat 873
  • Bobcat 883
  • Bobcat 963
  • Bobcat 5600
  • Bobcat A220
  • Bobcat A300
  • Bobcat A770
  • Bobcat S130
  • Bobcat S150
  • Bobcat S160
  • Bobcat S175
  • Bobcat S185
  • Bobcat S205
  • Bobcat S220
  • Bobcat S300
  • Bobcat S650
  • Bobcat S750
  • Bobcat 753
The Bobcat 6675779 is a binary pressure switch designed for automotive air conditioning systems on Bobcat construction machinery. It functions as a safety device monitoring refrigerant pressure, interrupting compressor clutch circuit at excessive high pressure or insufficient low pressure. Electrical configuration features a two-wire connector with normally open contacts for low pressure detection and normally closed logic for high pressure protection. The switch operates on 12V or 24V DC electrical systems. High pressure circuit opens at 390 psi and closes at 260 psi. Low pressure circuit opens at approximately 26-28 psi falling pressure. Compatible with R12 and R134a refrigerants. Mounting utilizes a female flare fitting, typically 7/16-20 UNF thread, for direct installation on receiver drier or condenser port.