Cosel Cosel EAC-30-472 Single Phase Power Cable EMI/EMC Filter 30A 250VAC Terminal Block Flange Mounting
VIEW PRICELog in to view your customer price
| Series | EAC series |
| Filter Type | Single-Phase, Single-Stage, Common-Mode EMI/EMC Power Line Filter |
| Voltage | 250 VAC / 250 VDC (50/60Hz) |
| Rated Current | 30 A @ 50°C |
| Pressure Test | Line-to-ground 2500 VAC (cut-off current 20mA, 1 minute, at room temperature and humidity) |
| Insulation Resistance | Line-to-ground 500 VDC, 500 MΩ minimum value (at room temperature and humidity) |
| Leak Current | Typical value < 1mA (250VAC/60Hz) |
| Operating Temperature | -25°C to +85°C (refer to derating curve) |
| Installation | Flange Mount |
| Connection Type | Solderless/wrap-around terminal |
| Frequency Range | 150 kHz to 1 MHz (common mode attenuation characteristic) |
| Surge Current Tolerance | Can withstand approximately 40A or 10 times rated current, non-repetitive for a few milliseconds |
| Compliance Certification | RoHS Directive Compliant, UL/cUL Certified (E62388), ENEC, CSA |
| Material | Metal Shell (Excellent Shielding Effect) |
| Weight | Approx. 220g |
Manufacturer No.
EAC-30-472EAC-30-472-D
Interchange No.
NBM-30-471-DEAP-30-472EAM-30-000EAC-30-222EAC-30-472-O
Fitment Vehicles
Switched-Mode Power SupplyServo DriveIndustrial Automation EquipmentInverterPLC Control CabinetMedical Equipment Power SupplyTest and Measurement Instruments
Electrical and Electronic System - Industrial Encyclopedia
Cosel EAC-30-472 Single Phase Power Cable Filter, rated current 30A, rated voltage 250VAC/250VDC, single stage common mode EMI/EMC filtering, frequency range 150kHz-1MHz. Press fit terminal, flange mounting, compliant with RoHS. Widely used in electromagnetic compatibility suppression of equipment such as industrial automation, switch power supplies, servo drives, etc. Provides original data sheets, pin diagrams, and selection support.