XZR8®
Bosch 0433271746 DLLA150S1066 Fuel Injector Nozzle
Bosch 0433271746 DLLA150S1066 Fuel Injector Nozzle - Image 2
Bosch 0433271746 DLLA150S1066 Fuel Injector Nozzle - Image 3
1 / 3

Bosch 0433271746 DLLA150S1066 Fuel Injector Nozzle


Express Free Shipping
3-Year Factory Warranty
90-Day Hassle-Free Returns
24/7 Dedicated Support
Nozzle TypeHole-Type (DLLA)
Spray Angle150 Degrees
Number of Holes3
Hole Diameter0.34 mm
Needle TypeS-Type (Short)
Opening Pressure225 bar
Bosch Stamping Number0433271746
Injector Assembly ReferenceKBEL90S48 / KBEL90S15/13
MaterialHigh-Grade Alloy Steel (Heat Treated)
Fuel TypeDiesel
Net Weight0.06 kg
Package Dimensions10 × 5 × 3 cm

Manufacturer No.

  • DLLA150S1066
  • 0433271746
  • 0 433 271 746

OEM Part No.

  • 0433271746

Engine Part No.

  • Steyr WD 611.85
  • Steyr WD 311.44
  • Steyr WD 612

Interchange No.

  • Bascolin DLLA150S1066
  • KBEL90S48
  • KBEL90S15/13

Fitment Vehicles

  • Steyr 91 Series Trucks
  • Case IH Tractors (Steyr Engine)
  • Marshall Tractors (Steyr Engine)
The DLLA150S1066 is a hole-type diesel fuel injector nozzle manufactured to Bosch OEM standards (part number 0433271746). It features a 3-hole spray pattern with 0.34 mm hole diameter and a 150-degree spray angle. The nozzle utilizes an S-type needle valve design for precise fuel metering in high-pressure injection systems. This component serves as a critical wear part within the KBEL90S48/TR injector assembly, commonly fitted to Steyr WD 611.85 diesel engines rated at 73 kW. It is designed for conventional pump-line-nozzle (PLN) systems operating at an opening pressure of approximately 225 bar. The nozzle body is constructed from high-grade alloy steel, heat-treated for wear resistance and dimensional stability under cyclic thermal and hydraulic loads. Cross-reference interchangeability includes Bascolin DLLA150S1066 and various aftermarket equivalents. Verification of the injector assembly number (KBEL90S15/13) and engine application (Steyr WD 611.85, WD 311.44) is required prior to installation. This part is non-returnable once the protective seal is broken due to calibration sensitivity.