J-Link JLINK V8+ ARM USB-JTAG Simulator Debugger with KESS V2/KTAG CPU Repair Chip
VIEW PRICELog in to view your customer price
| Connector Type | USB-JTAG，SWD |
| Supported CPU Core | ARM7, ARM9, Cortex-M3, Cortex-M0, Cortex-M4, ARM11 |
| Maximum Serial Transmission Speed | 12 MHz |
| Target Board Voltage | 1.2V - 3.3V, 5V Compatible |
| Power Supply Method | USB powered |
| Built-in Chip | 32-bit RISC CPU (e.g., STM32F103C8T6) |
| Debug Interface | JTAG (20 pin, 10 pin), SWD (2-wire) |
| Firmware Upgrade | Supports Automatic Online Firmware Upgrade |
| Software Development Environment | IAR EWARM, Keil MDK, ADS, RealView, WINARM |
| Operating Temperature | 0°C - 70°C |
| Typical Size | Approximately 50mm x 30mm x 15mm |
| Accessory Wedge Lock | KESS V2/KTAG CPU Repair Chip (one piece) |
Manufacturer No.
SEGGER
Interchange No.
J-Link V8JLink V8J-Link V9ULINK2
Diagnostic and Workshop Supplies - Industrial Encyclopedia
Professional J-Link JLINK V8+ ARM USB-JTAG simulator, supporting all ARM7/ARM9/Cortex-M3 core chips, compatible with mainstream IDEs such as IAR EWARM, KEIL, ADS. Equipped with KESS V2/KTAG CPU repair chip, it can solve the Kess V2 token issue. High-speed 12MHz serial transmission, supports 1.2-3.3V/5V target board voltage, suitable for ECU tuning, Flash programming, and development debugging.