SEGGER J-Link V8 ARM USB-JTAG Simulator Adapter Debugger with KESS V2/KTAG CPU Repair Chip
VIEW PRICELog in to view your customer price
| Connector Type | USB 2.0 Full Speed 12Mbps |
| Target Board Interface | JTAG (20-pin) |
| Data Transfer Rate | Maximum 12MHz |
| Target Board Voltage Support | 1.2V - 3.3V (compatible with 5V) |
| USB Power Current | <50mA |
| Supported CPU Core | ARM7/9/11, Cortex-M3/M4 |
| Main Control Chip | AT91SAM7S64 (some versions use STM32F205) |
| Development Environment Supported | IAR EWARM, KEIL, ADS |
| Indicator Light | USB communication indicator, target CPU status indicator, 5V output indicator |
| Application Scenario | Embedded Debugging, ECU Programming, Chip Calibration |
Manufacturer No.
J-Link V8JLINK V8
Interchange No.
J-Link V7J-Link V9J-Link V10J-Link V11
Fitment Vehicles
ARM7ARM9ARM11Cortex-M3Cortex-M4
Diagnostic and Workshop Supplies - Industrial Encyclopedia
SEGGER J-Link V8 ARM USB-JTAG Simulator, based on a high-performance 32-bit RISC CPU, supports ARM7/9/11 and Cortex-M3/M4 cores. Uses USB 2.0 full-speed interface, JTAG maximum transmission rate up to 12MHz. Compatible with IAR, KEIL, ADS and other mainstream development environments. Can solve the ECU programming token limit problem when used with KESS V2/KTAG. Suitable for embedded system development, automotive ECU programming and chip calibration, and is an efficient debugging and programming tool for professional engineers.