JST SPH-002T-P0.5S PH Series Soldering Terminal Female Connector Tin Plated Phosphorus Bronze 24-30AWG
| Series | PH Series |
| Contact Type | Female end (socket) |
| Connector Type | Soldered type |
| Applicable Contact | 24-30 AWG |
| Max Conductor Cross Section Area | 0.05-0.22 mm² |
| Rated Current | 2A |
| Voltage | 100V |
| Contact Method | Phosphor Bronze |
| Coating | Tin Plated |
| Pitch | 2.0 mm |
| Installation | Crimp |
| Operating Temperature | -25°C to +85°C |
| Rohs Compliance | Yes |
Manufacturer No.
SPH-002T-P0.5S
Interchange No.
SPH-002T-P0.5LSPH-004T-P0.5SBPH-002T-P0.5SSCT2001TPS105
Electrical And Electronic Systems - Industrial Encyclopedia
Purchase the original JST SPH-002T-P0.5S PH series soldering terminal, suitable for PHR series housing. This terminal is a female connector, made of tin-plated phosphorus bronze, supporting 24-30AWG wire gauge (0.05-0.22mm²), rated current 2A, rated voltage 100V. Widely used in consumer electronics, automotive electronics, industrial control and communication equipment for wire-to-board connections. In stock, supports 8K/disk order.