XZR8®
Jaguar T2H39458 Transmission Shift Module Assembly
Jaguar T2H39458 Transmission Shift Module Assembly - Image 2
Jaguar T2H39458 Transmission Shift Module Assembly - Image 3
Jaguar T2H39458 Transmission Shift Module Assembly - Image 4
1 / 4

Jaguar T2H39458 Transmission Shift Module Assembly


Express Free Shipping
3-Year Factory Warranty
90-Day Hassle-Free Returns
24/7 Dedicated Support
Operating Voltage12V DC
Transmission Type8-Speed Automatic (ZF 8HP)
Shifter MechanismLever Style (Joystick)
Connector InterfaceMulti-pin Sealed Electrical Connector
Housing MaterialReinforced Polymer with Aluminum Alloy Brackets
Position Sensor TypeHall-Effect
Communication ProtocolCAN Bus
Net Weight1.8 kg
Package Dimensions35 × 20 × 12 cm

Manufacturer No.

  • T2H39458
  • T2H39457
  • T2H34570
  • T2H25335
  • JX73-7E453-CB
  • JX737E453CB

OEM Part No.

  • T2H39458
  • JX73-7E453-CB

Engine Part No.

  • Jaguar 2.0L Ingenium I4 Diesel
  • Jaguar 2.0L Ingenium I4 Petrol
  • Jaguar 3.0L V6 Supercharged Petrol

Interchange No.

  • GJ1310

Fitment Vehicles

  • Jaguar XE (X760) 2017-2020 (VIN 942528 Onwards)
  • Jaguar XF (X260) 2016-2021
  • Jaguar F-Pace (X761) 2016-2021
The T2H39458 transmission shift module is an electromechanical gear selector assembly designed for Jaguar vehicles equipped with the 8-speed automatic transmission (ZF 8HP). It integrates the shift lever, position sensors, and electronic control interface into a single unit mounted on the center console. This module supersedes earlier part numbers T2H39457, T2H34570, and T2H25335. It features a lever-style (joystick) actuation mechanism as opposed to the rotary dial found on earlier production vehicles. For Jaguar XE models, application is validated for vehicles built from VIN 942528 onwards (approx. 2017 MY onward). The assembly communicates via CAN bus with the transmission control module (TCM) and requires no programming upon installation if replaced with the same part number variant. Construction consists of a reinforced polymer housing with aluminum alloy structural brackets, sealed electrical connectors, and Hall-effect position sensors for precise gear selection detection. Designed for 12V vehicle electrical system operation.