TDK-Lambda RSAL-2002W Single Phase EMC/EMI Power Line Filter 2A 250V Base Mount Lead Type
| Series | RSAL Series |
| Filter | Single Phase EMC/EMI Line Filter |
| Rated Current | 2A |
| Voltage | 250VAC / 250VDC |
| Installation | Base Mount / Chassis Mount |
| Termination Method | Wired (Wire Leads / Lead Wire) |
| Grade Level | Single Stage |
| Inductance | Common mode/differential mode parameters see data sheet (typical values 0.5-8mH / 0.7-30mH depending on frequency) |
| Pressure Test Line to Ground | Wire-to-wire 1450VDC / wire-to-ground 2250VDC (standard safety requirements) |
| Max Leak Current | Low leakage current option available (typically < 0.5mA @ 250V/60Hz) |
| Operating Temperature | -25°C to +85°C (including derating curve) |
| Fire Resistance Grade | UL 94V-0 |
| Certification | UL 1283, CSA C22.2 No.8, EN 60939 (ENEC), RoHS directive compliant |
| Characteristics | High-pressure pulse attenuation compatible, compact multi-purpose design |
| Encapsulation Type | Plastic housing, metal base for heat dissipation |
| Connector Type | 4 pins (L, N, L', N') + ground screw/bolt |
Manufacturer No.
RSAL-2002W
Interchange No.
RSAL-2002WLRSAL-2002ALRSEL-2002WNS-RSAL-2002W
Fitment Vehicles
Industrial Control Power SupplyMedical Electronic EquipmentTest and Measurement InstrumentsGeneral Single Phase Equipment Power Entry
Electrical And Electronic Systems - Industrial Encyclopedia
TDK-Lambda RSAL-2002W single phase power line filter, rated current 2A, rated voltage 250VAC/VDC, base mounted, lead terminals. The RSAL series has the ability to attenuate high voltage pulses, meets UL, CSA, EN safety certifications, low leakage current design, widely used in industrial control power supplies, medical equipment, test instruments and other general electromagnetic compatibility (EMC) suppression scenarios. Provides original data sheets, pin definitions and selection comparison.