TDK-Lambda RSEL-2006W Single-phase Power Line EMC Filter 250V 6A Wire-type Base Mounting
| Series | RSEL Series (Compact General Type) |
| Voltage | 250VAC / 250VDC (50/60Hz) |
| Rated Current | 6A |
| Phase Count | Single Phase (1-Phase) |
| Connector Type | Wire Leads, AWG20 |
| Installation | Base mounting/Flange mounting (Chassis Mount, Flange) |
| Max Leak Current | Standard type (optional low leakage current model) |
| Operating Temperature | -25°C to +85°C (Reduced Rating Required) |
| Pressure Test Line to Ground | 1000VAC Line-to-Line / 2000VAC Line-to-Ground (1 minute) |
| Insulation Resistance Initial Value | >100MΩ (500VDC) |
| Certification | UL1283, CSA C22.2 No.8, ENEC (EN60939), RoHS3 (Lead-Free) |
| Weight | Approx. 61g |
| Dimensions | Approx. 48mm x 22mm x 30mm (length x width x height) |
| Attenuation Performance | Common mode/differential mode high-frequency attenuation, effectively suppresses pulse noise |
Manufacturer No.
RSEL-2006WRSEL2006W
Interchange No.
RSAL-2006WRSHN-2006RSEN-2006PBF-1206-22ZWX300967-RSEL-2006WRSEL-2006WL
Fitment Vehicles
Switched-Mode Power SupplyIndustrial Automation Control EquipmentMedical Electronic EquipmentConsumer Electronic ProductsAutomotive Electronic SystemInstruments and Meters
Electrical And Electronic Systems - Industrial Encyclopedia
Original TDK-Lambda RSEL-2006W power line filter, single-phase 250VAC/VDC rated 6A, wire lead (AWG20) base mounting. Compact and general-purpose design, effectively suppresses conducted interference, complies with UL1283/CSA/EN60939 safety standards, widely compatible with switching power supplies, industrial control equipment, medical equipment, and automotive electronic systems.