TDK-Lambda RSEN-2006L Single Phase EMC Power Line Filter 6A 250VAC Terminal Block Mounting Base/DIN Rail
VIEW PRICELog in to view your customer price
| Series | RSEN Series |
| Filter Type | Single Phase EMI/EMC Power Line Filter |
| Rated Current | 6A |
| Voltage | 250VAC / 250VDC |
| Installation | Base mounting / DIN rail mounting (L suffix indicates DIN rail mounting foot) |
| Connection Type | Terminal Block |
| Operating Temperature | -25°C to +85°C |
| Leak Current | Low leakage current design (specific values according to data sheet, typically < 1mA @ 250V/50Hz) |
| DC Resistance | 110 mΩ (typical value, total) |
| Shell Size | Width 87mm × Height 35mm × Depth approx. 50mm (including terminals) |
| Weight | Approx. 230g |
| Certification | UL/cUL, ENEC, CSA, RoHS, REACH |
| Damping Characteristic | Common-mode/differential-mode attenuation (refer to the attenuation curve in the data sheet) |
| Application Scenario | General single-phase EMC countermeasure, suppression of conducted disturbance |
Manufacturer No.
RSEN-2006LRSEN-2006RSEN-2006DRSEN-2006LD
Interchange No.
RSEN-2006RSEN-2006DRSEN-2006LDRSAN-2006RSEV-2006
Fitment Vehicles
Industrial Automation Control CabinetSwitching Power Supply ModuleMedical Electronic EquipmentTest and Measurement InstrumentsInverter/Servo Drive
Electrical and Electronic System - Industrial Encyclopedia
TDK-Lambda RSEN-2006L single phase power line filter, rated current 6A, rated voltage 250VAC, terminal block wiring, supports mounting on base and DIN rail (L suffix). Low leakage current design, complies with RoHS standard, widely used in industrial automation equipment, power modules, medical equipment and test measurement instruments for EMI/EMC suppression. Complete data manual and original factory technical support provided.