TDK-Lambda RSEN-2010 Single Phase Power Line EMI Filter 10A 250VAC Base Mounting Terminal Block
VIEW PRICELog in to view your customer price
| Series | RSEN Series |
| Filter Type | Single-phase power line filter (Single Phase Power Line Filter) |
| Rated Current | 10A |
| Voltage | 250VAC / 250VDC (50/60Hz) |
| Installation | Base Mount / Chassis Mount |
| Connection Type | Terminal Block / Screw Termination |
| Filter Level | Single Stage |
| Operating Temperature | -25°C to +85°C (including derating curve) |
| Leak Current | Standard version < 1mA (250VAC/60Hz), Low leakage current version (L/D suffix) even lower |
| Test Voltage | Wire-to-Wire: 1450VDC / Wire-to-Ground: 2250VDC (or as per safety regulations) |
| Fire Resistance Grade | UL94V-0 |
| Certification | UL 1283, CSA C22.2 No.8 (cUL), EN 60939 (VDE), RoHS Directive (2011/65/EU) |
| Material | Metal housing (provides shielding) |
| Typical Application | Conduction Interference Suppression at the Input Terminal of Switched-Mode Power Supply, Inverter, Servo Drive, and Industrial Automation Equipment |
| Weight | Approx. 215g |
| Size (Length x Width x Height) | Approx. 87mm x 52mm x 35mm (refer to data manual) |
Manufacturer No.
RSEN-2010RSEN-2010LRSEN-2010DRSEN-2010LD
Interchange No.
RSEN-2010LRSEN-2010DRSEN-2010LD
Fitment Vehicles
Industrial Control EquipmentMedical Electronic EquipmentTest and Measurement InstrumentsCommunication Power Supply EquipmentSingle-phase Power Input Port
Electrical and Electronic System - Industrial Encyclopedia
Original TDK-Lambda RSEN-2010 single phase power line EMI filter, rated current 10A, rated voltage 250VAC/VDC, base mounting, terminal block connection. Compliant with RoHS standard, widely used for EMI/EMC noise suppression in industrial control, medical equipment, testing and measurement, and communication power supply. Complete data sheet and selection support provided.