TDK-Lambda RSEN-2010L Single Phase EMC/EMI Power Line Filter 10A 250V Terminal Block Base Mounting
| Series | RSEN Series |
| Filter | Single-phase EMC/EMI power line filter |
| Rated Current | 10 A |
| Voltage | 250 VAC / 250 VDC |
| Frequency Range | 50/60 Hz |
| Connector Type | Terminal Block |
| Installation | Base / Chassis Mount |
| Grade Level | Single Stage |
| Max Leak Current | Standard type (typical < 1mA @ 250V/60Hz) |
| Operating Temperature | -25°C to +85°C (including derating) |
| Climate Category | 25/085/21 (IEC 60068-1) |
| Fire Resistance Grade | UL 94V-0 |
| Certification | UL 1283, CSA C22.2 No. 8, EN 60939 (VDE), RoHS Directive (EU 2015/863) |
| Material | Metal Housing (Galvanized Steel Plate or Aluminum) |
| Terminal Screw Spec | M4 screw (torque required approximately 1.2 Nm) |
| Pressure Test Line to Ground | 1000 VAC (1 minute) |
| Packaging | Bulk / Pallet |
Manufacturer No.
RSEN-2010LRSEN-2010LD
Interchange No.
RSEN-2010RSAN-2010L
Fitment Vehicles
Industrial Control EquipmentSwitching Power SupplyAutomated MachineryInverterServo DriveMedical Electronic EquipmentTest and Measurement Instruments
Electrical And Electronic Systems - Industrial Encyclopedia
Original TDK-Lambda RSEN-2010L single phase EMC/EMI power line filter, rated current 10A, rated voltage 250VAC/VDC, terminal block wiring, base/chassis mounting. Compliant with RoHS standard, widely used in electromagnetic compatibility suppression of electronic systems in industrial control equipment, power modules, automation machinery, etc. Complete data sheet and pin diagram provided, supporting bulk purchasing and technical selection.