No Image Available
TDK-Lambda RSHN-2010L Single Phase High Attenuation EMC Power Line Filter 250V 10A Screw Terminal Low Leakage Current
| Series | RSHN Series |
| Filter | Single-phase High Attenuation EMC/EMI Power Line Filter |
| Voltage | 250 VAC / 250 VDC |
| Rated Current | 10 A |
| Filter Grade | Two-Stage |
| Connector Type | Screw terminal |
| Installation | Base Mounting / Optional DIN Rail Mounting (RSHN-2010LD) |
| Max Leak Current | Low Leakage Current Design (Suitable for Medical/Sensitive Equipment) |
| Pressure Test Line to Ground | Line-to-ground 2500 VAC / 60s |
| Insulation Resistance Initial Value | 100 MΩ min (line-to-ground, 500VDC) |
| Operating Temperature | -25°C to +85°C (Check Data Manual for Derating Curve) |
| Fire Resistance Grade | UL 94V-0 |
| Certification | UL 1283, CSA C22.2 No.8, EN 60939 (VDE), RoHS Directive |
| Material | Metal housing (good shielding effect) |
| Application System | Switched-mode power supply, inverter, UPS, input end conduction interference suppression for medical equipment |
Manufacturer No.
RSHN-2010LRSHN-2010RSHN-2010LD
Interchange No.
285-2747-ND46R0420NS-RSHN-2010LRSHN2010L
Fitment Vehicles
Single-phase switch power supply inputIndustrial automation control cabinetMedical electronic equipmentTesting and measuring instrumentsInverter/servo drive front end
Electrical And Electronic Systems - Industrial Encyclopedia
TDK-Lambda RSHN-2010L Single Phase High Attenuation EMC/EMI Power Line Filter, rated voltage 250VAC/VDC, rated current 10A, two-stage filtering, screw terminal wiring, base mounting/DIN rail optional, low leakage current design, compliant with RoHS standard. Widely used in industrial automation, medical equipment, conduction interference suppression at the input end of switching power supplies. Provides original data sheets, pin diagrams, and selection support.