TDK-Lambda RTAN-5010 Three-Phase Power Line EMI/EMC Filter 10A 500VAC Terminal Block Mount Low Profile
VIEW PRICELog in to view your customer price
| Series | RTAN Series |
| Rated Current | 10 A |
| Voltage | 500 VAC (Three-Phase Delta / 3-Line) |
| Frequency Range | 50/60 Hz |
| Circuit Stage | Single Stage |
| Installation | Base-mounted / bolted |
| Connection Type | Terminal Block |
| Leak Current | Typical value 5.0 mA (500V/60Hz) |
| Test Voltage | 1450 VDC |
| Test Voltage (Line-Ground) | 2250 VDC |
| Operating Temperature | -25°C to +85°C (including derating) |
| Climate Category | 25/085/21 (IEC 60068-1) |
| Fire Resistance Grade | UL 94V-0 |
| Material | Metal housing (galvanized steel plate) |
| Safety Certification | EN 60939 (IEC 60939), UL 1283, CSA C22.2 No.8 (cUL) |
| Length | 63 mm (2.48 in) |
| Width | 120 mm (4.72 in) |
| Height | 36 mm (1.42 in) - Low Profile Design |
| Weight | About 360 g |
| Common Mode-Differential Mode Attenuation | 0.3 - 30 MHz High Attenuation Characteristic (See data sheet curves) |
| Short Circuit Current Rating | 100 kA (with specific fuse) |
Manufacturer No.
RTAN-5010RTAN5010
Interchange No.
RTEN-5010RTMN-5010RTHN-5010RTCN-5010RTAN-5010D
Fitment Vehicles
Industrial Automation Control CabinetVariable Frequency Drive/Servo Drive Input EndUninterruptible Power Supply (UPS)Precise Test and Measurement InstrumentsMedical Electronic EquipmentNew Energy Charging PileRailway Traffic Signal System
Electrical and Electronic System - Industrial Encyclopedia
Original genuine TDK-Lambda RTAN-5010 three-phase delta connection power line filter, rated current 10A, rated voltage 500VAC, single-stage terminal block installation, low profile design (63x120mm). Widely used for EMC improvement and conducted disturbance suppression in industrial automation equipment, inverters, servo drives, UPS power and precision instruments. Compliant with EN/UL/cUL safety standards, complete data manual and technical support provided.