TDK-Lambda RTEN-5080 Three-Phase Power Line Filter 80A 500V Base Mount Terminal Block
VIEW PRICELog in to view your customer price
| Series | RTEN |
| Filter Type | Three-phase delta connection |
| Rated Current | 80A |
| Rated Voltage | 500VAC / 500VDC |
| Working Frequency | 50/60 Hz |
| Circuit Configuration | Single Stage |
| Installation | Base / Chassis Mount |
| Connection Type | Connector block |
| Leak Current | Typical < 30mA (Based on Specific Data Sheet Conditions) |
| Pressure Test | Line-to-Neutral 2500VAC / Line-to-Line 2000VAC (1 minute) |
| Operating Temperature | -25°C to +85°C (refer to derating curve) |
| Fire Resistance Grade | UL 94V-0 |
| Certification | UL 1283, cUL, ENEC 14 (EN 60939), RoHS Directive |
| Terminal Screw Specification | M6 |
| Recommended Torque | 2.5 - 3.0 Nm |
| Material | Metal housing (Galvanized steel plate/Aluminum) |
| Protection Rating | IP20 (Terminal section with cover) |
| DIN Track Installation | Not Supported (This model 80A is only for base installation, models below 30A support DIN Rail Option) |
Manufacturer No.
RTEN-5080
Interchange No.
RTEN5080
Fitment Vehicles
Industrial Automation EquipmentInverter/Servo DriveIndustrial Power SystemCNC Machine ToolRobot Control Cabinet
Electrical and Electronic System - Industrial Encyclopedia
Original imported TDK-Lambda RTEN-5080 three-phase delta connection EMI/EMC filter, rated current 80A, rated voltage 500VAC/VDC, single stage design, terminal connection, base/case mounting. Compliant with UL 1283, ENEC 14 and RoHS standards, widely used in electromagnetic compatibility suppression of industrial automation, inverters, servo drives and power supply equipment. Complete data manual, DXF drawings and selection support provided.