TDK-Lambda RTEN-5100 Three-Phase Power Line Filter 100A 500V Terminal Block Base Mount EMI Filter
| Series | RTEN Series |
| Filter | Three-phase three-wire (Delta) EMI/EMC power line filter |
| Rated Current | 100A |
| Voltage | 500VAC / 500VDC |
| Frequency Range | 50/60Hz |
| Grade Level | Single Stage |
| Connection Terminal Type | Connector Terminal / Screw Terminal |
| Installation | Base / Chassis Mount |
| Total DC Resistance | 10 mΩ max (typical value, per phase) |
| Max Leak Current | See data manual (depending on specific application wiring) |
| Operating Temperature | -25°C to +85°C (including derating) |
| Certification | UL 1283, CSA C22.2 No. 8, EN 60939 (ENEC), RoHS Directive |
| Fire Resistance Grade | UL 94V-0 |
| High Pressure Test | Line-to-line 1450VDC / line-to-ground 2250VDC (standard test conditions) |
| Application Scenario | General Industrial, Power Modules, Motion Control, Renewable Energy Equipment |
Manufacturer No.
RTEN-5100RTEN-5100J9J3-00
Interchange No.
RTCN-510025R2764
Fitment Vehicles
Three-phase Power SystemIndustrial Automation EquipmentInverterUPS Uninterruptible Power SupplySwitched-Mode Power SupplyServo Drive
Electrical And Electronic Systems - Industrial Encyclopedia
TDK-Lambda RTEN-5100 series three-phase power line filter, rated current 100A, rated voltage 500VAC/VDC, single-stage filtering, terminal connection, base mounted. Compliant with RoHS, UL, EN certification, suitable for EMI/EMC suppression of three-phase power systems in industrial automation, power equipment, inverters, etc. Provides original data sheets, inventory, and selection support.