TE Connectivity 171630-1 Econoseal J Mark II Waterproof Mother Terminal 24-20AWG Tin Plated Solderless Connector 1.8mm Series Automotive Connector Terminal
VIEW PRICELog in to view your customer price
| Manufacturer | TE Connectivity (Tyco Electronics/AMP) |
| Series | Econoseal J Mark II (E-J MK-2) |
| Part Number | 171630-1 |
| Connector Type | Female Terminal / Socket / Receptacle |
| Fitting Insert Size | Width 1.8mm (.071 in) × thickness 0.64mm (.025 in) |
| Wire Gauge Range | 24 - 20 AWG |
| Wire Diameter Range | 0.2 - 0.5 mm² |
| Base Material | Brass |
| Surface Treatment | Full Tin Plated (Pre-tin Plated) |
| Connection Type | Crimp |
| Installation | Cable Installation / Free Suspension |
| Protection Rating | IP67/IP69K (when equipped with matching sealing and protective sleeve) |
| Operating Temperature | -40°C to +125°C |
| Rated Current | Maximum 10A (20AWG) / 7A (24AWG) @ 23°C |
| Voltage | 250 VAC/DC |
| Contact Resistance | ≤ 5 mΩ (Initial) |
| Insulation Resistance | ≥ 20 MΩ (500 VDC) |
| Voltage Resistance | 1000 VAC (1 minute) |
| Packaging | Spool pack (standard 6000 pcs/spool) / Loose |
| Compliance Certification | RoHS Compliant, Pb-Free, ELV Compliant |
| Origin | Japan |
| HS Code | 8536909000 |
| Matching Connector | 171631-1 (Tab Contact) |
| Matching Seal and Guard | Econoseal J series silicone sealing rings (to be ordered separately) |
| Recommended Soldering Tool | TE 91500-1 Manual Clamp / Automated Soldering Mold (Applicator) |
Manufacturer No.
171630-10-0171630-1AMP 171630-1TYCO 171630-1
Interchange No.
171630-5171662-1171662-4171662-5171631-1171699-1CKK001-1.8FS
Fitment Vehicles
General Motors Wiring HarnessEngine Compartment Sensor ConnectionECU Control Unit WiringBody Control Module (BCM) Wiring HarnessConstruction Equipment/Commercial Vehicle Harsh Environment ConnectionNew Energy Vehicle Low Voltage Wiring Harness
Electrical and Electronic System - Industrial Encyclopedia
Original Genuine TE Connectivity (Tyco/AMP) 171630-1 Automotive Mother Terminal, belongs to the Econoseal J Mark II series, designed for waterproof sealing connections in harsh environments. Compatible with 24-20AWG (0.2-0.5mm²) wire diameter, tin-plated brass material, with 1.8mm plug width. Widely used in engine compartment sensors, ECU control systems and body wiring harnesses, with high temperature resistance, vibration resistance, and reliable IP67 waterproof sealing performance. Available in coil packaging (6000pcs/roll) and loose packaging, compliant with RoHS standards, supporting automated crimping tools.