Изображение отсутствует
Модуль источника питания с переключателем Cosel PBA75F-12 с единственным выходом промышленного класса 12V 6.3A 75W для установки на открытую раму / панель
| Выходное напряжение | 12V DC |
| Выходной ток 1 | 6.3A |
| Мощность | 76W |
| Диапазон напряжения | 85 ~ 264 VAC / 120 ~ 370 VDC |
| Интервал частоты | 47 ~ 63 Hz |
| Коррекция коэффициента мощности | >0.9 (typical at 115/230VAC full load) |
| Типичная эффективность | 88% (230VAC full load) |
| Настройка напряжения | ±0.4% within |
| коэффициент нагрузки | ±0.8% within |
| Шум волнистости | <150mVp-p (20MHz bandwidth) |
| Напряжение | Input-Output 3kVAC, Input-FG 2kVAC, Output-FG 500VAC |
| Начальное значение сопротивления изоляции | >100MΩ (500VDC) |
| Рабочая температура | -10°C ~ +70°C (to be derated according to curve) |
| Интервал температур хранения | -30°C ~ +85°C |
| Диапазон влажности | 20% ~ 90% RH, No Condensation |
| Сертификация | UL/CSA/EN/IEC 62368-1, 60950-1, CE (LVD, EMC, RoHS) |
| Размеры | 89 x 58.5 x 38 mm (open standard type) |
| Вес | Approx. 180g |
| Способ установки | Open Frame Mounting / Panel Mounting (Optional Cover -C Etc.) |
| Функция безопасности | Overcurrent Protection (Self-recoverable), Overvoltage Protection (Locking), Overtemperature Protection (Partial Models) |
Артикул производителя
PBA75F-12PBA75F-12-CTPBA75F-12-CPBA75F-12-NPBA75F-12-RNPBA75F-12-CN1PBA75F-12-ENPBA75F-12-JNPBA75F-12-RV
Применяемость
Industrial Automation Control CabinetInstrumentation and EquipmentCommunication Base Station Power SystemIndustrial Control Computer and Server ChassisTesting and Measuring InstrumentsSemiconductor Manufacturing Equipment
Электрические и электронные системы - Промышленная энциклопедия
Original Cosel PBA75F-12 series AC-DC switching power supply, single output 12V DC 6.3A, rated power 75.6W. Supports 85-264VAC wide range input, built-in active PFC power factor correction, efficiency up to 88%. Open frame/panel mounting design, compliant with IEC/EN/UL 62368-1 and 60950-1 international safety standards, offering -C, -N, -CT, -RN suffix options to meet different leakage current and installation requirements, widely applicable to industrial automation, instruments and meters, communication equipment and testing measurement systems.
