XZR8®
Изображение отсутствует

Изолированный модуль источника питания DC-DC Cosel SUCS3483R3 серии 3W - Вход 48В Выход 3.3В/0.6А


СерияSUCS3 (3W Series)
Структура топологииIsolation type DC-DC converter (single output)
Диапазон напряжения36 ~ 76 Vdc (nominal 48V)
Выходное напряжение3.3 Vdc
Выходной ток 10.6 A (600mA)
Мощность1.98 W (series maximum rated 3W)
Типичная эффективность72% (Vin=48V, full load)
Напряжение500 Vdc (Input-Output, 1 minute)
Электрическое сопротивлениеMinimum 100 MΩ (500Vdc)
Тип封装енияDIP Through-hole (suffix C/C-C) / SMD Surface Mount (suffix B/BP)
Количество пинов6 Pin
Рабочая температура-40°C ~ +85°C (refer to derating curve for details)
Интервал температур хранения-40℃ ~ +100℃
Функция безопасностиOvercurrent Protection (Self-Recoverable), Remote Switch Control (RC Terminal)
Электрическая емкостьNo aluminum electrolytic capacitors, no tantalum capacitors (high reliability design)
СертификацияRoHS Directive Compliant (Lead-Free), CE Standard (Safety Design)
Спецификации25.4 x 15.5 x 10.5 mm (typical value)
Интервал частотыApprox. 400 kHz (typical value)
Среднее время между отказами> 1,000,000 hours (MIL-HDBK-217F, Ground benign 25°C)
Артикул производителя
SUCS3483R3SUCS3483R3BSUCS3483R3CSUCS3483R3C-CSUCS3483R3BPSUTS3483R3
Применяемость
Industrial Control Board CardCommunication Network EquipmentTest and Measurement InstrumentsDistributed Power ArchitecturePCB On-Board Power Supply Module

Электрические и электронные системы - Промышленная энциклопедия

Original Cosel SUCS3483R3 series isolated DC-DC power module, input voltage range 36-76Vdc (nominal 48V), single output 3.3V/0.6A/1.98W, isolation voltage 500Vdc. Available in DIP straight insertion (SUCS3483R3C/C-C) and SMD surface mount (SUCS3483R3B/BP) dual packaging options, 6Pin standard pinout. Built-in remote switch control and output overcurrent protection, using non-aluminum electrolytic/tantalum capacitor design, operating temperature -40℃~+85℃, compliant with RoHS lead-free standard, widely used in industrial control, communication base stations, test measurement and other on-board power supply scenarios.