XZR8® 鑫眾潤
博世 0445120028 共軌噴油器總成
博世 0445120028 共軌噴油器總成 - Image 2
博世 0445120028 共軌噴油器總成 - Image 3
1 / 3

博世 0445120028 共軌噴油器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
製造商Bosch
系統型別Common Rail (CR)
驅動型別Solenoid
額定電壓24V
工作壓力1800 bar
噴嘴零件號DLLA142P1333 / 0433171827
噴嘴型別8-hole, 142-degree spray angle
聯結器型別Bosch 2-pin (AMP Junior Timer)
燃油型別Diesel (EN 590)
噴射策略Pilot, Main, Post Injection Capable
ECU 編碼要求Yes (IMA/IMA2 Codes)
淨重0.85 kg
包裝尺寸22 × 12 × 10 cm

製造號

  • 0445120028
  • 0 445 120 028
  • CRIN1-14/16
  • CRIN114/16

主機廠號

  • 0000504055805
  • 504055805

發動機號

  • Iveco Cursor 8 (F2BE)
  • Iveco Cursor 10 (F3BE)
  • Iveco Cursor 13 (F4AE)
  • FPT Industrial Cursor 8
  • FPT Industrial Cursor 10
  • FPT Industrial Cursor 13

互換號

  • DLLA142P1333
  • 0433171827
  • ES13536
  • ESY20281

適配車型

  • Iveco Eurocargo (Euro 4/5)
  • Iveco Stralis (Euro 4/5)
  • Iveco Trakker (Euro 4/5)
  • Iveco Bus Urbanway
  • Iveco Bus Crossway
  • Iveco Bus Magelys
The Bosch 0445120028 is a solenoid-type common rail fuel injector designed for high-pressure direct injection diesel engines. It features a compact design integrating the solenoid actuator, control valve, and nozzle needle within a single housing. The injector operates at system pressures up to 1800 bar, delivering precise fuel metering and multiple injection events per cycle for optimized combustion efficiency and emissions compliance. The nozzle assembly utilizes the DLLA142P1333 (0433171827) 8-hole nozzle with a 142-degree spray angle, calibrated for specific Iveco Cursor series engine combustion bowls. The injector body is manufactured from high-strength alloy steel to withstand cyclic high-pressure loads. The solenoid coil is rated for 24V vehicle electrical systems. End-of-line testing includes leakage, opening pressure, spray pattern, and flow rate verification per OE specifications. Primary OE cross-references include Iveco 504055805 and 0000504055805. Service replacement requires ECU coding (IMA/IMA2 codes) for pilot injection quantity calibration. Compatible with Bosch CP3.3 and CP4.2 high-pressure pump platforms.