XZR8® 鑫眾潤
Mopar 04891970AB 節氣門體總成
Mopar 04891970AB 節氣門體總成 - Image 2
Mopar 04891970AB 節氣門體總成 - Image 3
1 / 3

Mopar 04891970AB 節氣門體總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
孔徑直徑44 mm
工作電壓12V DC
控制型別Electronic Drive-by-Wire
整合感測器Dual Throttle Position Sensor (TPS)
外殼材料Aluminum-Zinc Alloy
安裝螺栓數量4
安裝螺栓扭矩8-10 Nm
聯結器型別6-Pin Sealed
燃油相容性Gasoline/Petrol
執行方式DC Motor with Gear Train
重量1.2-1.5 kg
替代件編號04891970AB -> 04891970AC -> 04891970AD
包裝尺寸18 × 14 × 12 cm

製造號

  • 04891970AB
  • 04891970AC
  • 04891970AD
  • 4891970AB
  • V33-81-0012

主機廠號

  • 04891970AB
  • 04891970AC
  • 04891970AD
  • 4891970AB
  • 231451005

發動機號

  • Chrysler 2.4L Tigershark MultiAir I4
  • FCA 2.4L Tigershark ED6/ED3

互換號

  • V33-81-0012
  • 1092080
  • 337-05509
  • 67-7014
  • LRD-TB186

適配車型

  • Chrysler 200 2015-2017
  • Dodge Dart 2014-2020
  • Jeep Cherokee 2014-2019
  • Jeep Compass 2017-2020
  • Jeep Renegade 2015-2023
  • Fiat 500X 2016-2018
  • Ram ProMaster City 2015-2022
The 04891970AB is an electronic throttle body assembly designed for the 2.4L Tigershark MultiAir I4 gasoline engine. It features a 44mm bore diameter with integrated throttle position sensor (TPS) and drive-by-wire actuator motor. The housing is constructed from aluminum and zinc alloy for thermal stability and durability. This unit controls intake airflow volume via ECU-commanded motor actuation, replacing mechanical cable linkage. The assembly includes the throttle plate, shaft, return spring, motor gear train, and dual-redundant position sensors. It communicates via CAN bus with the engine control module. Supersession chain includes 04891970AC and 04891970AD revisions addressing gear wear and motor brush longevity. Installation requires ECU relearn procedure after replacement. Mounting pattern uses four bolts with torque specification 8-10 Nm. Electrical connector is a 6-pin sealed interface. Operating voltage 12V DC. Weight approximately 1.2-1.5 kg.