XZR8® 鑫眾潤
大眾 0AM927769D 機電控制單元總成
大眾 0AM927769D 機電控制單元總成 - Image 2
大眾 0AM927769D 機電控制單元總成 - Image 3
大眾 0AM927769D 機電控制單元總成 - Image 4
大眾 0AM927769D 機電控制單元總成 - Image 5
1 / 5

大眾 0AM927769D 機電控制單元總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
變速箱型別7-Speed Dry Dual Clutch (DQ200 / 0AM)
工作電壓12V DC
控制介面CAN Bus (K-Line / CAN High/Low)
電磁閥型別High-Pressure Hydraulic Solenoids
閥體材料Aluminum Alloy
渦輪機外殼材料Reinforced Polymer / Aluminum
工作溫度範圍-40°C to +130°C
淨單位重量2.8 kg
程式設計要求Yes (Flash/Adaptation via ODIS/VAS)
Superseded Oe References0AM927769E, 0AM927769G, 0AM927769K
包裝尺寸35 × 25 × 18 cm

製造號

  • 0AM927769D
  • 25420KAR

主機廠號

  • 0AM927769D
  • 0AM 927 769 D
  • 0AM927769E
  • 0AM927769G
  • 0AM927769K
  • 0AM927769L
  • 0AM927769P
  • 0AM325025D
  • 0AM325025H
  • 0AM325065S

發動機號

  • 1.2 TSI
  • 1.4 TSI
  • 1.6 TDI
  • 1.8 TSI
  • 2.0 TDI

互換號

  • 2178620
  • HJ-24011-0AM
  • TRANSPEED-VW0AM927769D

適配車型

  • Volkswagen Beetle (5C)
  • Volkswagen Golf Mk6
  • Volkswagen Jetta (16)
  • Volkswagen Passat (B7)
  • Volkswagen Polo (6R)
  • Volkswagen Tiguan (5N)
  • Volkswagen Touran (1T)
  • Audi A1 (8X)
  • Audi A3 (8P/8V)
  • Audi Q3 (8U)
  • Skoda Octavia (1Z/5E)
  • Skoda Superb (3T)
  • Skoda Yeti (5L)
  • Seat Ibiza (6J)
  • Seat Leon (1P/5F)
  • Seat Altea (5P)
The 0AM927769D mechatronic unit integrates the electro-hydraulic valve body and the transmission control unit (TCU) into a single assembly for the 0AM/DQ200 7-speed dry dual-clutch transmission. The valve body housing is manufactured from aluminum alloy containing hydraulic channels, solenoids, and pressure sensors. The integrated TCU module processes input signals from vehicle sensors and executes clutch engagement and gear selection logic via high-speed CAN bus communication. This unit supersedes OE part numbers 0AM927769E, 0AM927769G, 0AM927769K, 0AM927769L, and 0AM927769P. It is compatible with valve body part numbers 0AM325025D, 0AM325025H, and 0AM325065S. The unit operates on a 12V DC electrical system and is designed for operating temperatures ranging from -40°C to +130°C. Critical installation requirement: Units are typically supplied blank (unprogrammed) and must be flashed with vehicle-specific software using diagnostic tools (ODIS/VAS 5054) before installation. Adaptation of clutch kiss points and basic settings must be performed post-installation to ensure correct shift quality and prevent premature wear.