

1 / 2
JLG 1001128685 高空作業平臺控制箱手柄總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 額定電壓 | 24V DC |
|---|---|
| 工作電壓範圍 | 18-32V DC |
| 控制器型別 | Dual-axis Hall-effect proportional |
| 輸出訊號 | 0.5-4.5V DC |
| 通訊協議 | CAN Bus (J1939) |
| 聯結器型別 | Deutsch DT Series |
| 防護等級 | IP66 |
| 工作溫度範圍 | -40°C to +85°C |
| 安裝模式 | Four-bolt console mount |
| 重量 | 1.2 kg |
| 包裝尺寸 | 25 × 15 × 10 cm |
製造號
- 1001128685
主機廠號
- 1001128685
- 1001128685S
適配車型
- JLG 1932RS
- JLG 3248RS
- JLG 1930ES
- JLG 6RS
- JLG 10RS
- JLG R10S
- JLG R6
Technical engineering specifications and operating parameters for the JLG 1001128685 platform control box assembly.
This unit integrates the joystick controller and PCU (Platform Control Unit) electronics into a single enclosure for electric scissor lift applications.
The assembly provides proportional control signals for drive, lift, and steer functions via CAN bus communication with the ground control module.
Environmental sealing meets IP66 rating for aerial work platform duty cycles.
Connector interface uses Deutsch DT series connectors for vibration-resistant mating.
Internal PCB contains microcontroller, motor driver ICs, and diagnostic LED indicators.
Operating voltage range 24V DC nominal (18-32V).
Joystick output: dual-axis Hall-effect sensors with 0.5-4.5V signal range.
Temperature range -40°C to +85°C.
Mounting: four-bolt pattern on platform console.
Weight approximately 1.2 kg.
OEM cross-reference interchange includes JLG 1001128685S superseded part number.








