XZR8® 鑫眾潤
中國重汽 1001227136 渦輪增壓器總成

中國重汽 1001227136 渦輪增壓器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
渦輪增壓型號Holset HE500WG / HX55 Frame
驅動型別Pneumatic Wastegate Actuator
渦輪機外殼A-R1.15
壓縮機誘導器直徑73.5 mm
壓縮機擴壓器直徑102 mm
渦輪輪緣88 mm
軸承系統Full Floating Journal Bearings
冷卻方式Oil Cooled / Water Cooled Option
油口螺紋M18 x 1.5
油口直徑30 mm Flange
平衡等級ISO 1940 G2.5
淨重18.5 kg
包裝尺寸52 × 42 × 38 cm

製造號

  • HE500WG
  • 202V09100-7828

主機廠號

  • 1001227136
  • 202V09100-7828

發動機號

  • Sinotruk WD615
  • Sinotruk MT13
  • Sinotruk D12

適配車型

  • Sinotruk Howo 371
  • Sinotruk Howo 375
  • Sinotruk Howo 420
  • Sinotruk Howo 440
  • Shacman F3000
  • Shacman X3000
This turbocharger assembly corresponds to Sinotruk OEM part number 1001227136, cross-referenced to Holset HE500WG model designation and OE number 202V09100-7828. It utilizes a fixed geometry turbine housing with wastegate actuator calibrated for Euro III to Euro V emission standards. The compressor wheel features extended tip technology for improved surge margin at high altitude operation. The center housing rotating assembly (CHRA) incorporates a fully floating bearing system with piston ring seals for oil control. Water-cooled bearing housing option available for MT13 engine variants. Unit is balanced to ISO 1940 G2.5 standard. Direct interchange for Sinotruk WD615 series (9.7L, 11.6L) and MT13 series (12.5L) diesel engines. Commonly fitted to Howo 371, 375, 420, and 440 horsepower tractor and dump truck configurations. Compatible with Shacman F3000 and X3000 platforms utilizing the same engine platforms. Installation requires new gasket kit and torque-to-yield fasteners per service manual procedure 05-01-12. Verify actuator rod length and wastegate preload setting before installation.